I havnt started yet but it seems a lot of people have been posting requesting how to's with regard to installing camshafts. If anyone has any tips or guides please let me know but my question is regarding using zip ties so the timing belt doesnt fall off. If im replacing my timing belt at the same time should i zip tie,install new cams, then change belt? or change belt, zip tie, then install cams?

 

Ah man you should search first - your going to eff your car up if you don't know what your doing. Your first post and everything, sheesh.

 

this should give u a little help

http://www.youtube.com/watch?v=ex-43BYrjP0

http://www.youtube.com/watch?v=uSKx_5FjwIU

 

I believe Hollywood on the other forum will be making one in the coming month.

 

This is the wrong section. He has a IX, not a X.

 

Do just like you would for a timing belt change but while the belts off swap cams. DUH

 

Evo X = Timing chain...no?

 

will a moderator pls move this forum into the right section for the op.. pls read alot on how to do this if u never done one before.. its not hard u just need to have some mechanical knowlege and i cant stress enough is to read read read. get urself a service manual from the dealer or thru an aut parts store..

 

oh and buy the timing belt tensioner tool. i beleive buschur racing sells them. really cheap and makes installation easier.