OneCrzyEvo21

iTrader: (17)

Hey Guys,

I heard it was pretty easy to instal the 2150s with the plug and play..Was wondering if anyone has done this and if you could help me out..Thanks!!

OneCrzyEvo21

iTrader: (17)

...Anyone

buchnerj

iTrader: (19)

Have you ever done an injector install on an Evo? If so, then yes they are pretty easy, they are just like my ID2000's.

sho669

iTrader: (34)

Same as any other injector pretty much. You need to bypass the injector resistor box for them to work correctly though.

OneCrzyEvo21

iTrader: (17)

Yeah i just ordered them and realized that sent me the wrong ones..I got sent the pigtails not the plug & Play that i ordered..Dammit

FromStock2Fast8

iTrader: (12)

How do you bypass the box???

suprastar

iTrader: (4)

i believe spoolin up makes a plug in play bypass for the resistor box or you can backyard it by unmounting it, unplugging it cut the plug off of the resistor box leaving as much wire as possible coming out of the plug side and solder preferably but basically connect all 5 wires together. then plug the modified plug back into the vehicle harness. The resistor box basically takes one wire in (12v) and runs it to through a resistor then to each injector. you are effectively bypassing the resistors by cutting them out of the circuit and supply one side of the injector a true 12volts.

rodent

iTrader: (35)

How to bypass the injector resistor box-

https://www.evolutionm.net/forums/ev...istor-box.html

Did it on mine. piece of cake!

blacksheep

iTrader: (2)

Wow, those are huge cc's. Are you running E85?

GreenAWD

iTrader: (19)

As said above make sure you bypass the resistor box. You can buy the spoolin' up plug or make your own. It's not that hard to do...