ToxicFab Bumper Latch Install Thread.
Thank you! Honestly, this is my first one and I was stressing out that I explained it the best I could to lead my customers down the right path.
Collin
Account Disabled
iTrader: (26)
Joined: Jul 2011
Posts: 1,784
Likes: 1
From: Clinton, NJ - Myrtle Beach, SC
Bumper for everyone that has purchased a ToxicFab Bumper Latch Install kit or customers that are interested in purchasing a kit!! Check out this great write up by Collin!
Trending Topics
Former Sponsor
Joined: Oct 2009
Posts: 96
Likes: 0
From: Fayetteville NC via Puerto Rico
Thanks bj. I'm sorry I get exited about your amazing products. Specially when I'm on the middle of a project that would benefit from this. Keep up the crazy work. Say hello to your robot welder friend.
Account Disabled
iTrader: (26)
Joined: Jul 2011
Posts: 1,784
Likes: 1
From: Clinton, NJ - Myrtle Beach, SC
Nice write up. I understand all the steps except this one
"Next take the 2 short stainless bolts and washer and mount your bumper to the core support. the factory tabs on your bumper that stick off will need to be cut off at this point. this is so you can remove with the buttons and pull straight out allowing the bumper to release from the quick latch."
Kind of confused on the part where it says factory tabs need to be cutoff....and so the short bolts still need to be removed with an Allen to completely pull of the bumper right?
And just curious on the status. They ready for shipping or no?
"Next take the 2 short stainless bolts and washer and mount your bumper to the core support. the factory tabs on your bumper that stick off will need to be cut off at this point. this is so you can remove with the buttons and pull straight out allowing the bumper to release from the quick latch."
Kind of confused on the part where it says factory tabs need to be cutoff....and so the short bolts still need to be removed with an Allen to completely pull of the bumper right?
And just curious on the status. They ready for shipping or no?
Account Disabled
iTrader: (26)
Joined: Jul 2011
Posts: 1,784
Likes: 1
From: Clinton, NJ - Myrtle Beach, SC
Nice write up. I understand all the steps except this one
"Next take the 2 short stainless bolts and washer and mount your bumper to the core support. the factory tabs on your bumper that stick off will need to be cut off at this point. this is so you can remove with the buttons and pull straight out allowing the bumper to release from the quick latch."
Kind of confused on the part where it says factory tabs need to be cutoff....and so the short bolts still need to be removed with an Allen to completely pull of the bumper right?
And just curious on the status. They ready for shipping or no?
"Next take the 2 short stainless bolts and washer and mount your bumper to the core support. the factory tabs on your bumper that stick off will need to be cut off at this point. this is so you can remove with the buttons and pull straight out allowing the bumper to release from the quick latch."
Kind of confused on the part where it says factory tabs need to be cutoff....and so the short bolts still need to be removed with an Allen to completely pull of the bumper right?
And just curious on the status. They ready for shipping or no?
He is talking about the small factory plastic nipples that pop into the fender on both ends. That little plastic nipple that wears out after removing/installing your bumper a couple times. Does that better explain it? We have 4 kits left in stock, 3 billet & 1 polished...
He is talking about the small factory plastic nipples that pop into the fender on both ends. That little plastic nipple that wears out after removing/installing your bumper a couple times. Does that better explain it? We have 4 kits left in stock, 3 billet & 1 polished...
but i had placed an order on the first 5 kits which is what im referring to...just curious if they are shipping or not.
Yes they shipped out yesterday, I'll be emailing tracking info tonight
