Hey people, I'm new here so don't hate please haha.

Anyway, I've got an Evo 4 and one of my spotlights isn't working, the other works fine. I've been told it'll either be the bulb or one of the wires has come loose. I'm pretty sure it's not the bulb because when I noticed one wasn't working I turned them off and back on...And they were both working again. And then the next night when I turned them on it was back to just 1 working.

I've tried putting getting my arm round it but there just so much **** in the way haha, and i tried putting it up on the hoist and going from the bottom but still stuff in the way. So i'm just wanting to know is the only way to get to these spottys by taking the front bumper off?

Cheers everyone

 

I'd imagine you don't have to remove the bumper to change a bulb so you should be able to access the spotlight assembly with the bumper on.

Where in NZ are you?

 

Alright, I'll have another go at it.
South Auckland

Cheers mate

 

bumper off unless you have extremely small arms

 

Haha darn, I thought that might end up being the case. ahwell it's mostly cable-tied on at the moment so shouldnt be too hard