AEM EMS Blowout Sale!!!
AEM EMS Blowout Sale!!!
Hey guys, we were fortunate enough to get our hands on a few AEM EMS for the Evo 8 & 9. We are running a blowout sale on these. We are offering prices you will never again see. Always wanted to go standalone but never thought you could afford it? PM or call us and we will offer you prices you can't refuse. We are running these prices until these few units are gone. THIS IS A ONE TIME SALE. Once these are gone they are gone!
Product Description
AEM’s Plug & Play Engine Management System (EMS) plugs directly into a vehicle’s factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. An integrated tuning wizard allows users to create a base map specifically for a car’s configuration, regardless of what type of injectors, sensors, coils or other changes have been made. The AEM EMS’s infinitely adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.
* Installs in minutes using Plug & Play technology—no wiring necessary!
* Start-up calibrations included
* Live help window eases tuning process
* Set-up Wizard creates a custom base map for your car
* System is fully enabled—Never pay for upgrades!
* Free software updates on aempower.com
* Uses all the factory sensors
* Runs on Windows™ compatible software
* Fuel table automapping
* Programmable traction control
* Onboard 512kb datalogger
* Up to 10 cylinder sequential fuel injection
* 16 general-purpose outputs
* 7 definable switch inputs
* Electronic boost control
* Soft cut rev limiters
* Two step launch control
* Wet or dry nitrous control
* Definable knock control
* Full idle control
* 4 EGT inputs with fuel control
* 16/32 hybrid high speed processor
SPEED DENSITY CAPABILITY: The AEM Evo 8/9 EMS system can eliminate the factory mass airflow sensor, using the included speed density basemap and optional 3.5 BAR MAP sensor (30-2130-50) and Inlet Air Temp Sensor (30-2010). AEM reccomends purchasing and using these sensors as the Speed Density configuration has been shown to yield more power.
AEM EMS: $1390 SHIPPED
AEM EMS Evo 8: AEM 30-1313
AEM EMS Evo 9: AEM 30-1320
Also available at additional cost:
AEM 3.5 bar MAP sensor: AEM 30-2130-50 $175
AEM IAT Sensor: AEM 30-2010 $65
AEM UEGO Wideband AEM 30-4100 $279
You can also call us at 770-792-0202
Install and Tuning Specials also available
Product Description
AEM’s Plug & Play Engine Management System (EMS) plugs directly into a vehicle’s factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. An integrated tuning wizard allows users to create a base map specifically for a car’s configuration, regardless of what type of injectors, sensors, coils or other changes have been made. The AEM EMS’s infinitely adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.
* Installs in minutes using Plug & Play technology—no wiring necessary!
* Start-up calibrations included
* Live help window eases tuning process
* Set-up Wizard creates a custom base map for your car
* System is fully enabled—Never pay for upgrades!
* Free software updates on aempower.com
* Uses all the factory sensors
* Runs on Windows™ compatible software
* Fuel table automapping
* Programmable traction control
* Onboard 512kb datalogger
* Up to 10 cylinder sequential fuel injection
* 16 general-purpose outputs
* 7 definable switch inputs
* Electronic boost control
* Soft cut rev limiters
* Two step launch control
* Wet or dry nitrous control
* Definable knock control
* Full idle control
* 4 EGT inputs with fuel control
* 16/32 hybrid high speed processor
SPEED DENSITY CAPABILITY: The AEM Evo 8/9 EMS system can eliminate the factory mass airflow sensor, using the included speed density basemap and optional 3.5 BAR MAP sensor (30-2130-50) and Inlet Air Temp Sensor (30-2010). AEM reccomends purchasing and using these sensors as the Speed Density configuration has been shown to yield more power.
AEM EMS: $1390 SHIPPED
AEM EMS Evo 8: AEM 30-1313
AEM EMS Evo 9: AEM 30-1320
Also available at additional cost:
AEM 3.5 bar MAP sensor: AEM 30-2130-50 $175
AEM IAT Sensor: AEM 30-2010 $65
AEM UEGO Wideband AEM 30-4100 $279
You can also call us at 770-792-0202
Install and Tuning Specials also available
Last edited by Ryan@Forged; Dec 22, 2009 at 05:22 AM.
