Brian Crower 280 Camshafts! IN STOCK AGAIN!
Thread Starter
Former Sponsor
iTrader: (97)
Joined: Aug 2006
Posts: 890
Likes: 1
From: Bergen County, NJ
Brian Crower 280 Camshafts! IN STOCK AGAIN!
In Stock @ 201 Motorsports!
Hey guys!! We have 3 more sets of these popular camshafts in stock! We'll even bundle them together with the required Brian Crower Spring/Retainer Kit so you have everything you need to get these bad boys into your car
Cams and Spring/Retainer kits can be sold separately, let me know what you need! Check out the dyno sheet at the bottom of the post to see the performance gains that are possible! The last sale we ran was greatly successful so they're back in stock and ready to rock!!!
Brian Crower 280/280 Cams
Originally Posted by Brian Crower, Inc
Brian Crower Evolution camshafts are manufactured to top-quality specifications. These cams are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within .02mm. Every Brian Crower camshaft profile has been prototyped and dyno tested for proven horsepower results prior to placed into mass production.
All Brian Crower Evolution camshafts are checked on a high speed, sub-micron accuracy measuring gauge. The Adcole Camshaft Measuring System uses individual measuring heads for each cam journal and cam lobe, with .01 micron resolution, taking one datum point each 1/10th of a degree or 3,600 data points per revolution. Measuring camshafts for rise error and chattermark detection, this model can measure 200 parts per hour.
All Brian Crower Evolution camshafts are checked on a high speed, sub-micron accuracy measuring gauge. The Adcole Camshaft Measuring System uses individual measuring heads for each cam journal and cam lobe, with .01 micron resolution, taking one datum point each 1/10th of a degree or 3,600 data points per revolution. Measuring camshafts for rise error and chattermark detection, this model can measure 200 parts per hour.
Brian Crower Spring/Retainer Kit
Originally Posted by Brian Crower, Inc.
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.
Price: PM me!
Mods List: Brian Crower 280/280 Cams – T3/T4 Turbo (24 psi), Brian Crower Spring/Retainer Kit, 3” Downpipe, 3” Catback, 850cc Injectors, 3” Exhaust w/ Test Pipe, race gas.
Mods List: Brian Crower 280/280 Cams – T3/T4 Turbo (24 psi), Brian Crower Spring/Retainer Kit, 3” Downpipe, 3” Catback, 850cc Injectors, 3” Exhaust w/ Test Pipe, race gas.
Thread Starter
Former Sponsor
iTrader: (97)
Joined: Aug 2006
Posts: 890
Likes: 1
From: Bergen County, NJ
