Hello Everyone!

As one of the largest Cosworth distributors it's my pleasure to show you the new M3 "race" cams for the EVO 9.

These cams are set more aggressive and are meant for up-graded turbo systems and motors.

The specs are
IN - 280 (11.6mm of lift)
EXT - 272 (11mm of lift)

PLEASE NOTE: This kit requires valve springs!!!

The valve springs can be purchased as a combo with the cams or separately.

Part number for the valves is #20000164

Here's a dyno chart that shows the different between the M2 and M3 EVO 9 cams.



Gains will vary with the different setups people are using.

Please PM me of give me a call to get pricing or place an order!
JON EXT:230 Email: Jong@vividracing.com

 

These cams would be great for guys with big turbo's that want a bit more up top.

I am sure they would also be beneficial for the stock turbo guys that want a more aggressive cam set up.

280in-- 11.6mm
272 Ex-- 11.0mm

They dont have many of them so get them quick.

Mitch

 

One set down! very limited sets in stock!

 

Is the exhaust cam the same with the 272 set?

If yes will we be able to purchase the intake cam seperately!

 

Mitch/Jon

PM'd you both about these cams - can you quote me please

cheers

John

 

Hello,

The exhaust cam is 272 same as the 272. Unfortunately since this is a very limited amount of sets they are only being sold as sets. Once these sets are gone I should be able to get the 280 cam by it self.

Regards
Jon

 

Hi John,

You got PM!

 

Thanks mate!

i emailed you (not you personally but another fella from Vivid) about the spec sheet of the M3s. PRobably he misunderstood and he emailed back the spec sheet for the M2s. Can you post or email me the spec sheet of the M3s?

I am particularly interested on the effective duration and some other tech info...

Also price shipped to 11357 for the set?

Thanks

 

I'll tr to get that info from Cosworth when they come back to the office from the PIR show. PM sent on the cam pricing.

Thank you.
Jon

 

Bump!

 

When are you going to be able to get the intake cam by its self?

 

Maybe this page doesn't get checked very often, but I would like to know when the intake cam is going to become available.

 

Sorry for the delay, The intake cams should be able to be purchased some time next month. I do have a few set's left in stock, with valve springs and with out if you already have valve springs.

Thank you
Jon

 

i already have a supertech valvetrain and a greddy timing belt. im gonna get a cam gear for the exhaust side too.

BTW: How much is it for the M2 intake cam by its self?

 

I already have the 272's in my car now... can you pm me a price on the IN - 280 (11.6mm of lift) to 33414. Thanks.