Hey everyone,

I hope you all had a great weekend. We wanted to dedicate this week to our machine shop and showing everyone what we do and how we do it! You'll see tons of great pics, videos and posts about engines that we can build, are building and have built! If you've got an SBR head or short block, shoot me an email and we can post up some of your pics, too!

Our state of the art machine shop offers the best in equipment, expertise and experience. Our machinist have been building motors since before a lot of us were even born. ROFL :applause:

Our machine shop builds hundreds of Mitsu, Subaru, Nissan and Toyota engines every year! We have build engines for the street cars, drag cars, rally cars and even air planes!

Check out just one quick charting of an EVO 2.4L Short Block that we build last week!



Manley Rods, Wiseco Pistons and ACL Race Bearings make for one great combination!!!!!!


The blue dots indicate that inspection and proper torque procedures have been done and checked!


Assembled short block.


Short Block is placed on the wooden frame and ready to be crated!


We put a lot of care and effort into carefully crating these engines. They are strapped down and secured.

 

Any deals on built shortblocks? I'M IN NEED ASAP!

 

shot you a PM, buddy!

 

 

EVO VIII Stroker Short Block

OEM Short Block
OEM 100MM Crank
Manley Rods
Manley Platinum Series Pistons
ACL Main Bearings
ACL Rod Bearings
Decked
Machined
Assembled
$2899

 

EVO 2.4L Short Block. Ordered on the 25th, built and ready for crating by the 31st! That's turn around!!!!

We are your one stop shop for everything engine related! Our machine shop is kicking *** and taking names!

 

(Sorry Marti - was not sure where to put this!) Help move inventory to make some money for the EVO X "PROJECT".

EVO 2600 Pressure Plate - ACT MB017X $395.00 shipped.

EVO IX Streetlite flywheel ACT 600550 $295.00 shipped.

CC 5051-2100 Lancer (NON EVO) Stage 2 Clutch Kit $288.75 shipped.

4-Channel C2DI Digital Ignition Module - AEM 30-2821 $249.00 shipped.

AEM Methanol Injection Kit with 5 Gallon Tank AEM 30-3001 - $429.00 shipped.

19 Channel Serial Gauge - AEM 30-4300 - $179.00 shipped.

Evolution IX 288 Cams BC-0123 - $329.00 shipped.

BC CAMSHAFTS - STAGE 3 (Mitsubishi 4G63 Evo) - BC-0112 - $329.00 shipped.

Avid AC.MM.015R Performance Upgrade Mount Kit for Mitsubishi EVO 8/9 (4 piece) - $249.00 shipped.

Filter, In-Line Long Length AN -6 Inlet/Outlet (10 Micron Replaceable fabric element)
Fuelab 82801-c C = Color Code: (1-6) - $75.00 each shipped (many colors)

Standalone Wideband Guage kit - Innovate - 3781 - $299.00 shipped.

Evo VIII drop in filter - K&N 33-2105 - $50.00 each shipped.

Replaces stock water reservoir APS EVO-IWS/01 - $99.00 shipped.

All in stock - can ship anything on the list the same day.

sales@slowboyracing.com is paypal - just let us know what product you need! We have multiple of most products, but some are singles. If you order and we do not have or run out - we will refund promptly.

Thank you for looking at our get this stuff of my shelf garage sale.

Mike Huml
- Slowboy

 

Thats my 2.4!

 

it's on the way to you, buddy!

 

we've got more blocks in the machining process, now!!! Let us know what questions we can answer for you!

 

Bump for Slowboy.

 

you're a good egg

 

what does the 2.4 water pump hit that causes you to have to runa 2.0 water pump with adaptor? What else is needed to put the 2.4 in the Evo other than that?

 

It's spacing to properly align the pulley with the belt.

You need a head gasket, adjustable cam gears and a 4g64 belt.

 

Proly not the place to post this, but hopefully I can get the answer Im looking for.

What keeps a person from using the 2.4 water pump? What degree's do you have to adjust the cams to? (or is it a setup that each has to be degree'ed, and there isnt a "base" setting?)

Stock 2.4 head gasket works?