It's finally here! Nisei Engineering Intercooler!
#260
Former Sponsor
iTrader: (36)
Join Date: Oct 2008
Location: Los Angeles
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to say, IT'S FINALLY BACK!!! EXCEPT BETTER THAN EVER!
This was a old post I've found and had some interesting information on the street core which has been discontinued a long time ago. The current unit is called the COMPETITION CORE and is very much improved!
The difference between the Nisei "Street" and Nisei "Competition" FMIC is:
1) Competition FMIC - ALL NEW FIN GEOMETRY & CONFIGURATION! Street = 13fpi, Split vs Competition 9fpi, Banked/Curved
2) Street had 2.5" endtanks inlet/outlet. The Competition endtank inlet/outlet = 3" in, 3" out. The only core you will ever buy. No upgrades necessary when you get a turbo upgrade.
3) Pressure drop (Stock turbo @23psi)- Street = avg 1.6psi across the core. Competition = avg .7psi which is less than half of older design.
4) Outlet temps (single gear pull) - Street = avg <10*F above ambient (80*F). Competition = No change same results.
5) Crash Beam Support - Both Street & Competition fit no modification.
6) Both units were/are compatible with stock piping or any piping which uses stock FMIC & stock couplers.
7) Price of Street was $695 as Introductory. Price on Competition .... TOO LOW to post. Consider this the Introduction of Maxum Technologies / Re-Introduction of Nisei Engineering to EvoM Deal! PM or call (213)909-8022 for details.
Here is what the Nisei Engineering COMPETITION FMIC looks like:
Without & With Crash Beam
For you 9 Guys!
Jed
Call with any questions! (213)909-8022
This was a old post I've found and had some interesting information on the street core which has been discontinued a long time ago. The current unit is called the COMPETITION CORE and is very much improved!
The difference between the Nisei "Street" and Nisei "Competition" FMIC is:
1) Competition FMIC - ALL NEW FIN GEOMETRY & CONFIGURATION! Street = 13fpi, Split vs Competition 9fpi, Banked/Curved
2) Street had 2.5" endtanks inlet/outlet. The Competition endtank inlet/outlet = 3" in, 3" out. The only core you will ever buy. No upgrades necessary when you get a turbo upgrade.
3) Pressure drop (Stock turbo @23psi)- Street = avg 1.6psi across the core. Competition = avg .7psi which is less than half of older design.
4) Outlet temps (single gear pull) - Street = avg <10*F above ambient (80*F). Competition = No change same results.
5) Crash Beam Support - Both Street & Competition fit no modification.
6) Both units were/are compatible with stock piping or any piping which uses stock FMIC & stock couplers.
7) Price of Street was $695 as Introductory. Price on Competition .... TOO LOW to post. Consider this the Introduction of Maxum Technologies / Re-Introduction of Nisei Engineering to EvoM Deal! PM or call (213)909-8022 for details.
Here is what the Nisei Engineering COMPETITION FMIC looks like:
Without & With Crash Beam
For you 9 Guys!
Jed
Call with any questions! (213)909-8022
Last edited by Jedi@MaxumTec; Nov 18, 2008 at 02:06 PM. Reason: Adding information
#261
Former Sponsor
iTrader: (36)
Join Date: Oct 2008
Location: Los Angeles
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys,
If anyone is wondering about pricing, we're about to launch a BLACK FRIDAY! If you want to be a part of the sale and help us set some price standards to help us better serve you. Here is your chance to be a contributor. The current Competition FMIC MSRP's for $895 BUT, on this thread I know the Street was listed @ $695. We're trying to beat that price for BLACK FRIDAY and we need your suggestions to make this work.
If you want to contribute to what items are up for sale and help with setting up price ranges we're trying to get you guy involved and taking a survey. For the details of what we're looking for:
Details - https://www.evolutionm.net/forums/sh...99&postcount=1
If you want to post about your thoughts:
Thread - https://www.evolutionm.net/forums/sh...ighlight=nisei
Thanks guys for your input and support!
If anyone is wondering about pricing, we're about to launch a BLACK FRIDAY! If you want to be a part of the sale and help us set some price standards to help us better serve you. Here is your chance to be a contributor. The current Competition FMIC MSRP's for $895 BUT, on this thread I know the Street was listed @ $695. We're trying to beat that price for BLACK FRIDAY and we need your suggestions to make this work.
If you want to contribute to what items are up for sale and help with setting up price ranges we're trying to get you guy involved and taking a survey. For the details of what we're looking for:
Details - https://www.evolutionm.net/forums/sh...99&postcount=1
If you want to post about your thoughts:
Thread - https://www.evolutionm.net/forums/sh...ighlight=nisei
Thanks guys for your input and support!
Thread
Thread Starter
Forum
Replies
Last Post
Jedi@MaxumTec
Evo 'For Sale' External Engine / Power
20
Nov 27, 2008 10:56 PM
myevostore.com
Evo 'For Sale' External Engine / Power
245
Jan 31, 2008 09:52 PM
myevostore.com
Evo 'For Sale' External Engine / Power
23
Aug 19, 2007 05:56 PM
myevostore.com
Evo 'For Sale' External Engine / Power
16
Feb 3, 2005 05:55 PM