TTP-Engineering's Hot Parts in November SALE!
Nov 28, 2006, 10:43 AM
#78
I found one last Evo9 actuator. Last one in the USA. First PAYPAL takes it!
1. Forge EVO 9 high-boost wastegate actuator!
From 15-34.9psi+
Designed by Forge to replace the original component this uprated actuator is serviceable and guaranteed for life. It comes with an uprated diaphragm and a billet CNC machined aluminium mounting bracket.
Fits EVO 9
This product is built with a predetermined actuator spring suitable for at or above factory boost levels. The actuator is assembled with a stiffer spring right out of the box.
This product is designed and built with the intent of increasing the boost output of a turbocharged system.
TTP-Engineering cannot assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not tuned for boost levels higher than stock.
$175 SHIPPED!
1. Forge EVO 9 high-boost wastegate actuator!
From 15-34.9psi+
Designed by Forge to replace the original component this uprated actuator is serviceable and guaranteed for life. It comes with an uprated diaphragm and a billet CNC machined aluminium mounting bracket.
Fits EVO 9
This product is built with a predetermined actuator spring suitable for at or above factory boost levels. The actuator is assembled with a stiffer spring right out of the box.
This product is designed and built with the intent of increasing the boost output of a turbocharged system.
TTP-Engineering cannot assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not tuned for boost levels higher than stock.
$175 SHIPPED!
Dec 4, 2006, 02:15 PM
#80
Carbonetics Carbon Clutches!
Carbonetics/ATS presents its carbon clutch produced by a joint development with ACROSS Corporation. ACROSS Corporation is a leading carbon manufacture with the most advanced CC composite technology in the world. The super light and heat resistant characteristics of CC composite gives a driver truly exceptional strength, response, and durability. Its operation is very smooth and easy on the transmission. From the street to the racetrack, under any driving condition, ATS carbon clutch enhances your driving performance and excitement.
Super shift response- The weight of ATS carbon friction disk is only 400g. It is exceptionally light.
Super heat-resistance- Designed to resist over 2,000 degrees Centigrade (3,650 degrees Fahrenheit)
Super deformation-resistance- The deformation is 1/10 of iron. You always get a smooth & crisp engagement
Super easy operation- Operating ATS clutch is very easy, even when driving up a slope and in a traffic congestion Super power transfer- 10% to 30% higher transfer capacity than the metal clutch
Super durability- Due to the various favorable characteristics of carbon, the clutch has a very long life
-ATS carbon clutch comes with ATS light flywheel made of carbon steel. Includes pull to push conversion.
For drag racing the Triple 1350 is recommended. For street/strip car the Twin 1350 is recommended. For just daily driver the Twin 1100 is recommended
$1649 FOR TWIN CARBON!
Dec 4, 2006, 08:31 PM
#82
Originally Posted by Airpower
Have you weighed these carbonetics clutches? If you have what's the weight difference between them (twin, triple) vs. the tilton.
I have a customer removing the Tilton Carbon ($4500) and going back to a Carbonetics/ATS as his best times with less driveline breakage was done on the Carbonetics/ATS unit. 10.2 @ 140MPH.
Lower E.T. launches are able to be obtained with a more stocklike weight clutch at a lower rpm.
Dec 7, 2006, 09:52 AM
#84
TTP-Engineering is proud to announce that we are moving over the the carbonetics triple carbon unit as soon as it arrives.
Spoke to Carbonetics and got the low down on BTQ ratings
TWIN CARBON 1350KG = 750-800 TQ
TRIPLE CARBON 1350KG = 1300-1350 TQ
26.7LBS = Lighter than 32lbs stock clutch and FW!
Spoke to Carbonetics and got the low down on BTQ ratings
TWIN CARBON 1350KG = 750-800 TQ
TRIPLE CARBON 1350KG = 1300-1350 TQ
26.7LBS = Lighter than 32lbs stock clutch and FW!
Last edited by TTP Engineering; Dec 7, 2006 at 10:07 AM.
Dec 8, 2006, 09:03 AM
#85
Newbie
Join Date: Sep 2005
Location: Massachusetts
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
TTP
You guys are out of control, sick prices!!
Can you pm me for the downpipe, DV, and an ACT Street Kit shipped to 01803.
I wish I lived in FLA I'd have you install everything for me too!!
Thanks,
Jay
You guys are out of control, sick prices!!
Can you pm me for the downpipe, DV, and an ACT Street Kit shipped to 01803.
I wish I lived in FLA I'd have you install everything for me too!!
Thanks,
Jay
Dec 8, 2006, 09:14 AM
#87
Originally Posted by jhill299
TTP
You guys are out of control, sick prices!!
Can you pm me for the downpipe, DV, and an ACT Street Kit shipped to 01803.
I wish I lived in FLA I'd have you install everything for me too!!
Thanks,
Jay
You guys are out of control, sick prices!!
Can you pm me for the downpipe, DV, and an ACT Street Kit shipped to 01803.
I wish I lived in FLA I'd have you install everything for me too!!
Thanks,
Jay
$799 shipped
Dec 8, 2006, 09:22 AM
#88
Newbie
Join Date: Sep 2005
Location: Massachusetts
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Damn, I didn't see the RWD conversions on your website, I'll take one of those too!
Can you give me a break down on that price (the 799, jk on the RWD)and I'll call you next Friday to set it up.
thanks
Can you give me a break down on that price (the 799, jk on the RWD)and I'll call you next Friday to set it up.
thanks
Dec 11, 2006, 11:07 PM
#90
Rated to 740 ft-lbs tq!
Nasty high tq holding, very lightweight, high rpm shifting unit complete with full stainless steel braided lines all the way to the master cylinder from the patented hydraulic release bearing.
Best pricing anywhere! PM us!