BLMW

We ran this special a couple of months ago, and have gotten a lot of requests since then to run it again - so we are!! You can get our Digital Torque Wrench w/ Blow Molded Case for $99 - including shipping. Just go to our website: Brown Line Metalworks, LLC | Professional Grade Digital Torque Wrench and click on the "Buy Now" button. At checkout, enter the coupon code: EVOM

You can see the torque wrench in action in the following video:

[youtube]cEJsE2vlxxE[/youtube]

Product Specifications

Patented Double Gear Sensing System
Designed, engineered, and tested by Brown Line Metal Works, the patented* D.G.S.S. technology ensures repeatable accuracy of +/- 3.5% both clockwise & counter-clockwise
Accurate from 20 – 100% of full scale (7% accuracy from 10 – 20% of full scale)

Microprocessor Controlled
8-bit electronics ensures accurate readings and simplicity of use
Allows for both Peak and Track mode
Individually calibrates each wrench
Supplies unique serial number for each wrench

Ratchet Head
1/2" drive reversible ratchet
32-tooth gear provides an 11.25º arc while handling high torque loads
Forged from Chromium Vanadium alloy to ensure strength
Conforms to ASME B107.10 2005 standards

Range
15 – 150 ft/lbs
180 – 1,800 in/lbs
20.3 – 203 Nm

Digital Control
Large backlit digital display shows both target torque and current read-out
Intuitive button design makes operating torque wrench simple
LEDs and digital display provide visual feedback when operating wrench
Buzzer creates audible feedback when target torque is reached
Easily switch between ft/lbs, in/lbs, and Nm
Automatically powers off when not in use for 2 minutes
Low battery indicator

Handle
Soft-touch overmold provides comfortable non-slip grip
Engineered plastics ensure an impact resistant housing


The offer is valid until June 1st, and is only for the lower 48 states.

wizzo 8

iTrader: (35)

How quick is the measurement taken? I have a cheap electric torque wrench that needs to be used very slowly or it will overshoot your setting if you use it too quickly. Also when is the torque wrench with angle torque coming out?

BLMW

We are targeting early next year for the angle version of the wrench.

In terms of the speed, the numbers appear in real time. There is no lag. However, as with any torque wrench, it is good to pull at a slow, smooth speed so that you have sufficient reaction time to stop pulling when you hit your target.

BLMW

BLMW

15 days left. Time is running out!!

BLMW

8 days left. Don't miss out.

BLMW

2 Days left. Get yours while you can!