* Fits all Mitsubishi Evolution 8 & Mr 2003-Up.

* Light Weight, Strong, and Rigid.

* Made of Aluminum.

* Improves front struts by giving the chassis more rigidity, resulting in better handling.

* Developed by Beatrush of Japan.

* Track tested for functionality by Beatrush.

* Fits all 2003-up Mitsubishi Evolution 8 & 9.

* Light Weight, Strong, and Rigid.

* Made of Steel w/ a diameter of 31.8mm and jointless brackets.

* Improves rear struts by giving the chassis more rigidity with the unity of the struts, thus resulting in better handling & a more stable vehicle.

* Track tested for functionality by Beatrush of Japan.

Note: Painted in Beatrush's signature gold color.

* Due to the heavy loads caused by the arm unit of the suspension during track used or daily hard driving, deformation of the stock bushing is formed producing wasteful movements of the arm that changes alignment of the suspension as time passes. This wasteful movement of the arm can be controlled with the Beatrush rear differential mount spacer, by using a controlled measured urethane bushing that can be exchange sufficiently without loosing traction efficiency.

* Fits all Evolution 8, 9

# Acceleration is enhanced by preventing the distortion produce by the movement of the propellor shaft.

# Made of Aluminum with a gold alumite finish.

# Fits all 2003-up Lancer Evolution 8 and 9 Models.

* Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush Performance Bar restrains suspension links and other installation points to enhance rigidity, which make the suspension movement smooth and enhances steering response as well as traction. Also preventing chassis distortion. Chassis distortion will reduce the car's suspension feeling, giving it more understeer.

* Fits all Lancer Evolution 8/9 CT9A.

* Made by Beatrush of Japan, a leader in competition parts.

* Track tested for functionality.

# Prevents transmission & engine from pushing backwards while shifting; specially on high power Evos.

# Reduces the heavy loads on lower member arms caused by repetitive front-back engine/transmission movement produced by the accelerating and decelerating from constant shifting during auto-x, drag racing, etc.

# Increases acceleration time, grip, and suspension feel due to reduce pressure loads on lower arms from engine movement during shifting.

# Made of steel for increased strength. •Fits all 2003-up Lancer Evolution 8 and 9 Models.

* Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush Performance Bar restrains suspension links and other installation points to enhance rigidity, which make the suspension movement smooth and enhances steering response as well as traction. Also preventing chassis distortion. Chassis distortion will reduce the car's suspension feeling, giving it more understeer.

* Fits all Lancer Evolution 8/9 CT9A.

* Made by Beatrush of Japan, a leader in competition parts.

* Track tested for functionality.