what size spacers would you guys recommend for my evoX rims on my evo8 to give it a wider looking stance without looking like a lowrider? ty

 

Stock Evo X wheels are: 18x8.5 +38.

depending on tire size and camber settings you could do a 20mm up front or a 15mm.
In the rear I would recommend a 15mm.

 

PM me price for a pair of the 15mm shipped to 94568 pls thanks

 

Thank you guys!
All PM's replied.

 

Hey Guys....
15mm and 20mm bolt-on hubcentric spacers are currently sold out.

 

Mike,

It's Jalal (duh). I bought a set of CL RC5+ brake pads from you a few months ago. They're doing great, but they dust a bit (i don't care), and they squeal a bit at the end of a stop (i still don't care). Thanks for all the help you gave me!

Here's my current setup:

Evo IX MR
OEM MR Bilstein's
GT Worx Springs
100% Stock Bushings
Volk CE28N 18x9.5 +34
Dunlop SP Sport 600 245/40R18 (OEM '08+ STi Tires)

I have my eccentric bolt swapped so that I'm running the OEM -2° front camber.

I only want spacers for my front wheels so that I can fill out the fenders a bit more when you're looking at them from a 3/4 angle front or rear. The gap is towards the top where the wheel dips into the fender because of the camber.

I don't want to worry about studs so I was thinking about picking up a set of the Ichiba Version II 15mm spacers with the studs and hubcentric rings built in.

Do you envision me having any issues at all with the spacers working with my Volks? Will I have any issues with the stud length and/or the hubcentric rings?

Please break it down for me and any other Volk owners.

I know there is a wait, but I'm willing to wait!

Thanks!

-Jalal

 

PM's replied.

thank you!

 

What size spacers are needed to make OEM BBS wheels look flsuh? car is lowwered on SWIFT springs and running 235/45 tires with -2.5 camber in front and -2 in rear.

 

^^ Should be fine with 15mm, I am going to be needing a set myself.

 

Do you need extended studs for those?

 

I dont see why if you go the bolt on ones.

 

20mm should do great!

Version 2 bolt-on Hubcentric spacers do not require you to use extended studs.
Only the version 1 "slip-on" will require extended studs.

 

Can i get a priced PMed please

 

If 15mm would make my BBS flush I need a price shipped to 27530 please

 

20mm bolt-on hubcentric spacers arent still sold out are they???