Hey Guys...

Were are a premiere distributor for Ichiba...

Hit me up for BEST PRICING.

Here are the 10mm Slip-on spacers with 45mm Extended studs for the EVO's:
MSRP: $105.00




Here are the 15mm Bolt-on spacers for the EVO's.
Built in Hub centric rings!!!!
MSRP: $135.00




If you need just the extended studs...12x1.5: 45mm length
$2.50 ea



I can get 20mm or 25mm for EVO's as well...
Beefy...


Four Lugs also available...


5mm Version I:


Alternate option for 10mm spacers:
Kics Project 10mm BOLT-ON Spacers. These spacers are NOT hubcentric.

 

15mm Bolt-on spacers for the EVO's.
Built in Hub centric rings

Are these hubcentric for the evo and do 18x9.5+28 nto3s fit perfectly with these? Any customers with my setup run these spacers. If yes, please pm how much shipped to 92870. Can send payment instantly.

 

These are hubcentric for the Evo 8.
We noticed that Enkei NT03+M center bore is 72mm rather then the typical 73mm like the RPF1 / Work Wheels and SSR's...
If you have plastic hubcentric rings, you can shave off the 1mm of the outer edge.

 

Can't wait for mine to come in the mail. Will post pics and review when I do. Great vendor to deal with btw. Explained everything to me over the phone and answered all my questions.

 

price shipped to san diego ca 92139 for ver.2 15mm. i just want to clarify if these fit the nto3-m' w/out any problems as far as hubcentric ring goes

 

Yes, you won't have any issues with NT03+M with these!

 

In stock Guys...

PM Me for the best price!!!!!

 

You have PM

 

2nd.

 

need a price for 20mm ones, also if the hubcentric rings will work on the volk RE30's?

 

does anyone know the spacing for the stock rims? I want to get a wider stance but retain the OEM rims. Please help

 

I believe Volks come in either the 73.1mm or the 75mm center bore sizes. Ichiba Wheel spacers will work with the 73.1mm center bore.

The OEM Evo 8 wheels are 17x8... offset is I think +35. You can go with a 20mm spacer to make it pretty flush.
With the 20mm spacer it will be +15 offset, however having 8" wide wheels allows room for big spacers.

 

will these fit base lancers?.. 4x100.. im looking for hub centric 10mm spacers?.. is so how much for 4 shipped?..

 

pm'd!

 

Sorry, Ichiba do not make spacers with 4x100 that has a 67.10mm center bore.