JDM Beatrush UnderPanel - 1st in the U.S.
installed mine today, went pretty well.
on my car I had to shim it down a little by the downpipe. otherwise the downpipe rattles the panel. first I droped the center mounting piece about a quarter of an inch with some spacers. Then I put a bushing on a longer bolt on the side that the downpipe is on, (mounted on the same center mounting part.)
Maybe I missed something in the instructions, but it seemd to go in as intended.
on my car I had to shim it down a little by the downpipe. otherwise the downpipe rattles the panel. first I droped the center mounting piece about a quarter of an inch with some spacers. Then I put a bushing on a longer bolt on the side that the downpipe is on, (mounted on the same center mounting part.)
Maybe I missed something in the instructions, but it seemd to go in as intended.
you have to remove the rear part of the panel, 2 bolts, 3 allen screws.
i just installed mine last week at AMSTuning, thanks mike and cory, and i was very impressed with the construction and the fitment. i am going to replace the 5 rear panel fasteners with allen head dzuz fastners to keep removal simple.
oh, again, very nice piece kami
i just installed mine last week at AMSTuning, thanks mike and cory, and i was very impressed with the construction and the fitment. i am going to replace the 5 rear panel fasteners with allen head dzuz fastners to keep removal simple.
oh, again, very nice piece kami
Thread Starter
Former Sponsor
iTrader: (88)
Joined: Aug 2005
Posts: 863
Likes: 2
From: Orlando, Florida
Originally Posted by kmcconn9
I am sure there is no room left for a group buy, but how long would it take to get one shipped to 21742?
Originally Posted by nothere
installed mine today, went pretty well.
on my car I had to shim it down a little by the downpipe. otherwise the downpipe rattles the panel. first I droped the center mounting piece about a quarter of an inch with some spacers. Then I put a bushing on a longer bolt on the side that the downpipe is on, (mounted on the same center mounting part.)
Maybe I missed something in the instructions, but it seemd to go in as intended.
on my car I had to shim it down a little by the downpipe. otherwise the downpipe rattles the panel. first I droped the center mounting piece about a quarter of an inch with some spacers. Then I put a bushing on a longer bolt on the side that the downpipe is on, (mounted on the same center mounting part.)
Maybe I missed something in the instructions, but it seemd to go in as intended.
Originally Posted by puckadog
you have to remove the rear part of the panel, 2 bolts, 3 allen screws.
i just installed mine last week at AMSTuning, thanks mike and cory, and i was very impressed with the construction and the fitment. i am going to replace the 5 rear panel fasteners with allen head dzuz fastners to keep removal simple.
oh, again, very nice piece kami
i just installed mine last week at AMSTuning, thanks mike and cory, and i was very impressed with the construction and the fitment. i am going to replace the 5 rear panel fasteners with allen head dzuz fastners to keep removal simple.
oh, again, very nice piece kami
Last edited by Kami Speed; Jan 18, 2006 at 11:21 PM.
Thread Starter
Former Sponsor
iTrader: (88)
Joined: Aug 2005
Posts: 863
Likes: 2
From: Orlando, Florida
To change the oil, the rear part of the Beatrush underpanel has to be removed. Which is a total of 5 bolts; so not all the underpanel has to be removed. Please know that the Beatrush underpanel comes in 2 pieces; front and rear section.
The Beatrush UnderPanel is $325+shipping.
The Beatrush UnderPanel is $325+shipping.
Thread Starter
Former Sponsor
iTrader: (88)
Joined: Aug 2005
Posts: 863
Likes: 2
From: Orlando, Florida
Originally Posted by funnyclub
Hey Kami have you any which will fit a Evo VII also can you ship to Ireland.
Originally Posted by milo
Can I still get in the GB? I don't have an EVO 9 as of now, but would love to get this product.
Last edited by Kami Speed; Jan 21, 2006 at 10:09 AM.
