I'm wondering where the correct place to put it is. I've seen it mounted in different locations on the trunk lid, but I want it to be authentic. I got the real deal one from Lancer shop so I wanna do it right. Can anyone provide pictures?

 

here is a link to my thread, check mine out...

https://www.evolutionm.net/forums/sh...d.php?t=176075



-Bobby

 

right above the trunk line.
https://www.evolutionm.net/forums/sh...5&postcount=21
https://www.evolutionm.net/forums/sh...&postcount=191

 

use this link: http://www.joe250.com/cars/evo/badgeremoval.htm

 

I would follow this link too, I read this one when I did my badge application and it was easy to follow. The whole thing isn't really that difficult, you just want to get it all lined up right the first time.

 

Can anyone reccomend some type of chemical to remove the adhesive? Maybe if you debadge it right after you get a new one it's okay but on my 03 this stuff is ON THERE. It's like thick putty. I tried heat, razor blade and elbow grease, it just tears paper towels to shreds and nothing seems to take it off. I'm thinking Goo Gone or Goof Off...anyone got ideas?

 

yours in not low enough

 

WD-40 works wonders. Dont worry its not going to make your paint fall off. Just put on a coat of wax when you are done. As you should anyways if you been scrubbing the same spot on the paint.

 

hmm...so is the "T" in evolution supposed to be mounted right on the center of the mitsu badge? the other link shows it on the left side of the "T"

im confused

 

+1 on the WD 40.

 

dont use a razor blade = sratched paint

goo-gone / motor oil / windex

 

soak it with goo-gone.