LY evodave lights And APR splitter
Originally Posted by Misael
Nice!! I want to black my headlights all out by him soon but I just dropped mines at CRD to get a flywheel and clutch kit installed. Have u ever been there?
.......Tell Kevin i said Wassabe,also there is a TEMEVO meet sat at the dolphin mall, i'm going to try to make it there but i'm not sure if i can yet.
Originally Posted by Evo Girlie
i'm not putting the rods on the bumper i will pit it on the mesh or grill w/e u call it. I don't want something permanet u know. My car will only be used tomorrow and after it will be sitting at home till wednesday when i can get the rods on,any suggestions on wha other tools i can use to make it more firm besides the ones it came with???
Also, I have mine bolted to the mesh, with washers. You should be aware that the problem with this is that the shafts sit on the bumper and rub the paint off, here's a pics of how I set it up. Right under the mesh is where the rods touch the paint and have worn it away...
yeah i had my splitter on there without rods and the first day that i hit 110mph the front factory lip ripped off from the bumper completly! FYI - get it attached asap! It totally trashed the splitter!
Originally Posted by Evo Girlie
Here guys is a pics of my LY w evodave lights and apr splitter
p.s the rods will be on in a few days
p.s the rods will be on in a few days
Evolved Member
iTrader: (4)
Joined: Jul 2005
Posts: 1,007
Likes: 0
From: Germantown, Maryland/Carbondale, IL
Originally Posted by Evo Girlie
evoviiiyou----thankx and yes he does great work =P
SterlingEvo-- i may end up doing my tails 2 right now i got jdm evo 7 tails but the black looks very aggresive. After it was all isntalled i was sweating the car for the rest of the day hehe. The splitter looks good i just have to get the rods on asap i notice its 2 much force on the lip itself so i may end up taking the lip out and just put the splitter back on w the rods.
SterlingEvo-- i may end up doing my tails 2 right now i got jdm evo 7 tails but the black looks very aggresive. After it was all isntalled i was sweating the car for the rest of the day hehe. The splitter looks good i just have to get the rods on asap i notice its 2 much force on the lip itself so i may end up taking the lip out and just put the splitter back on w the rods.
sterlingevo- thans for the pic and it sucks that it does dat to the paint but well mitsubishi paint sucks eitherway lol
Brandonbigdog- wow 1st day it flew off lol i dont think ill be 110 anytime soon but just incase i will get those rods on hehe
flabarm-he actually had a core set so i didn have it down at all. pm and ask if he has a core set avail
links0000- send an offer my way, lights are brand new condition no dings or chip or anything on them =)
Brandonbigdog- wow 1st day it flew off lol i dont think ill be 110 anytime soon but just incase i will get those rods on hehe
flabarm-he actually had a core set so i didn have it down at all. pm and ask if he has a core set avail
links0000- send an offer my way, lights are brand new condition no dings or chip or anything on them =)
I had my "rods" fall off, and caused the little OEM bumper lip to seperate! The 1" piece above the splitter. new one cost 350.00!!! The OEM bumper piece. I had angle iron pieces bent into the position, and bolted those on, and no problems!!! Dont use the junky rods, as they can come apart (on the top mostly) and you can lose your splitter. I drove mine without the rods for 1 week, at highway speeds, and broke the "clips" which hold on the stock little bumper piece on the bottom.
Originally Posted by smokedmustang
I had my "rods" fall off, and caused the little OEM bumper lip to seperate! The 1" piece above the splitter. new one cost 350.00!!! The OEM bumper piece. I had angle iron pieces bent into the position, and bolted those on, and no problems!!! Dont use the junky rods, as they can come apart (on the top mostly) and you can lose your splitter. I drove mine without the rods for 1 week, at highway speeds, and broke the "clips" which hold on the stock little bumper piece on the bottom.