Hi

Does anyone know, if Recaro Pole Position Seats fit into an Evo IX?

Link: <<- Homepage of a dealer ->>

Picture of the Pol's:



Thank you very much

 

i have on in my evo8 so i would think yes. to evo9 but i dont have the slider i have just a bracket were the side mounts mounted to. lighter and sit little lower. lot lower lol better woot woot

 

ok, and it wasnt necessary to cut something out the center console?

do you have leather seats or cloth/drapery?

thanks

 

THey should fit fine. The only thing that will determine the fitment is whether you can find the bottom bracket. Also whether the shoulder supports will hit the pillers. I have a sparco EVo in my 8 and i love it!!! No sliders *****!

 

cool, thanks for the input.

 

ya i wont knew if i had o cut anything my car is fully gutted but from the looks does not look like will need to anyhow. only thing is the seat belt. on the bracket i got was so low that he didnt make the seat belt bracket part up enougt so i had to bang bang the car lol. but other then that its ok.

and i had stock leather seat now is cloth

 

if i can get a hold on a digtal cam i will take pic and post them

 

If you want sliders I would recommend the Bride FG rails. Very nice, sitting about 2" lower than stock with Sparco Pro2000. No mods or cutting to any part of the interior. They are rock solid, no movement. Only downfall is weight, they are 9 lbs. Aspec can get them, ask for Francis.

 

whats the full weight with seat, side mount, bracket, slider if have

 

The FG rails are mounts (to chassis)/sliders/side mounts (to seats) all in one piece. Their total weight is 9lbs. My Pro2000 is 19 lbs. So total weight for both is 28 lbs, stock seat is 37.5 lbs.

I attached a few pics of the rails and seat.

 

thats nice lol. my is bracket is 5lb side mount 2lb seat 14.7lb 21.7lb and stock seat on my scale was 35lb and seat belt and all was 7lb so total 41lb.

 

those look about as low as possible, are those the same height/lower/higher than the stock ones?

link for purchase?

 

there are different versions of this seat available...

Fabric:


Leather:


Mix between Fabric/Leather:



whats your recommendation and why?
thank you!