evo 9 rear bumper warping
Thread Starter
Evolving Member
iTrader: (9)
Joined: Nov 2004
Posts: 391
Likes: 0
From: NJ Bergen county/NY
evo 9 rear bumper warping
Help does anyone know if i could fix my rear bumper cus its kinda warping near the exhaust. its reseading a bit. Does anyone know how to fix this?
mine did the same thing..its because part of the FIN onmy bumper was hitting the exhaust. I took a dremel and trimmed the little corner underneath so it woulndt be touching the can of the exhaust
Thread Starter
Evolving Member
iTrader: (9)
Joined: Nov 2004
Posts: 391
Likes: 0
From: NJ Bergen county/NY
Its the JDM 9 bumper... Yeah i have that same problem onescklambo. But by trimming it did it go back into place or it stays that way? cus its hella annoying me
Originally Posted by onesicklambo
mine did the same thing..its because part of the FIN onmy bumper was hitting the exhaust. I took a dremel and trimmed the little corner underneath so it woulndt be touching the can of the exhaust
What exhaust is that? GReddy Ti?
I'm running the JDM rear with the GReddy Ti and had a similar issue of the bumper touching the can just a bit. I think that's what's happenig to yours. I pulled the bumper out just a bit to clear the can, but it bows outward just slightly now instead of inward like yours. It isn't as noticeable when it bows outward, though …
I'm running the JDM rear with the GReddy Ti and had a similar issue of the bumper touching the can just a bit. I think that's what's happenig to yours. I pulled the bumper out just a bit to clear the can, but it bows outward just slightly now instead of inward like yours. It isn't as noticeable when it bows outward, though …
Thread
Thread Starter
Forum
Replies
Last Post
fugiwara
Evo Tires / Wheels / Brakes / Suspension
17
Feb 13, 2006 08:20 AM
EVOtook
Evo Tires / Wheels / Brakes / Suspension
46
Apr 10, 2004 04:24 PM
