^ more pics! Looks nice

 

I suppose I can contribute.

Wheel Size: 18x9.5 +27
Tire: Nitto NT555 265/35

 

what's the amount of camber you guys run to fit the +27 offset in back and +17 in front?

and is the bumper bolt relocation necessary?

 

I tried 265/35 tires and it rubbed everywhere and even after rolling, I would have to relocate the rear bolt. I dropped down to 245/40 and all my problems went away lol. I didn't touch the camber and rear bolt is still in place. I'm on spec-R swift springs and even with a full trunk and heavy passengers, I'm good.

 

nice! I was planning on running 255/35's when I get these wheels. hopefully they wont rub like your 265's. I never thought of doing 245/40

 

To all the guys running +27 with 265's? How do you make it work?

 

Well I ended up going with my buddies stock advan's off of his X so I ended up with that size

 

What camber do you guys run up front on the +27 offset with a 255/35 tire? Mine are Nitto 555's 255/35/18

I'm currently running -3.0 up front and I have fender mod but I want to take it out but I'm still slightly rubbing even with the camber and fender mod on the first setting

 

 

Will be fitting my 18x10+18 with Nitto 555 255/35 shortly once they arrive. Anyone forsee any problems I might have?

Will post pics once installed.

 

anybody running -3.0 camber and still rubbing up front? I know I'm low but I've seen some others with similar ride height and they only have to run -2.0 and have no fender mod.. this is how the car sits currently

[/URL]

 

^ What size tires?

 

nitto 555's, 255/35

 

People with 245s and under will fit alot easier than 255s and up.

Have you rolled or pulled your fenders at all?

 

Yea but from other posts it seemed doable with the 255's. My rears are rolled. I only have rubbing in the front. The fronts have the evo dave fender mod on the first setting I dont want to go any more on that. I'd rather just take it out completely since a lot of other members run these w/o rubbing issues w/o the fender mod