The Ultimate Aggressive Wheel Thread...
True, but most people run +30 P45Rs with 8mm spacers up front giving you +30 in the rear and +22 up front. I can only image how that would effect handling.
PS: The white Voltexed car with the SBC RS rims is just sick!
Link to another hot wheel thread:
https://www.evolutionm.net/forums/sh...d.php?t=253351
PS: The white Voltexed car with the SBC RS rims is just sick!
Link to another hot wheel thread:
https://www.evolutionm.net/forums/sh...d.php?t=253351
Last edited by TURBevO8; Feb 24, 2007 at 03:12 PM.
Evolving Member
iTrader: (1)
Joined: Jun 2003
Posts: 417
Likes: 0
From: its not where you at, its where you from!
I have a general question regarding spacers. I used a 3 or 5mm spacer on the rear end when I was rocking the stock wheel/tire combo. I now have VOLK TIME ATTACK CE28 N's (18 x 8.5, +32 offset with 245/45/18 rubber). Would it be detrimental, in any way, to use them just to push the wheels out a bit?
Ok just curious maybe someone can provide some insight, the wheels above are Nt03-m 18x9.5 +27 with 10 mm spacers in front.... Does that mean with the spacers that the actual offset is+17 in the front? just curious? also how does that affect your handling for autocross and road driving if your front wheels stick out 10mm more than your rears, wouldn't that be similar to using staggered widths but only having the bigger ones in the front? I seriously need some rims lol
^ haha, stock ride height is soon to be cured with some muellerized jic's, i havent even bothered with the idea of putting springs on because i track my car and have mueller's stg 1 suspension kit right now..








