here are the new black wheels that i had just completed this weekend

 

Give us the low down on the process, simple [paint or powder coat? I've been thinking of going this route and think they would look great on my RR MR...

 

it was pretty easy, but just time consuming; here is a list of things that i used to complete the project;

1. 3 cans duplicolor black wheel coating paint
2. 1 can of duplicolor clear coat wheel coating paint
3. 220 bit sandpaper
4. 1 can of automobile primer
5. degreaser

 

first thing u need to wash get rid of all the grease/oil and break dust on the wheels; then you allow to dry and begin sanding and scuffing the wheel to allow the paint to adhere better; once that is done, i again washed all the dust from the sandpaper off the wheel and air dried; then you can tape the wheel around the edges; i used 3m masking tape; that was pretty time consuming;

now you are ready to paint with the primer first; once that is done, allow to dry for about 1 hour; then you can paint with the black wheel coat; lots of lite coats is best of course; within an hour of the final coat on the wheel you will need to spray the clear coat; again allow an hour to dry before putting the wheels back on the car

 

That loooks sick man , Dammm i want a set of MR wheels.

 

forgot to add a roll of 3m blue masking tape for the wheels

 

classic

 

nice job

 

NICE Black BBS!

 

Black on black looks real nice.

 

Very nice indeed.

 

Are your steps backwards??? Looks good though!

 

looks good. have a better photoshoot with it

 

Nice Job From Fellow Clarksvillian

 

looks good