Just about ready to add to this thread.

 

I had a girl tell me my French blue aka BBY car looked like a crayon tonight.

 

must had been drinking or just not a smart one as there are plenty of those running around.

 

I'll put up a couple of grainy cell phone pics I just snapped of the new Blue Evo in a few min. Turning out pretty nice.

 

Sorry for the terrible cell phone pics. I'll snap new ones this week when the car is 100% done, along with the full mod list, but you get the idea. Start to finish this one took us 6 weeks.

 

Full mod list for it.



ENGINE:
Freshly Built 2.1
4G64 2.4L Block
Wiseco 4G64 Forged 9.0:1 Stroker Pistons
4G63 Lightened and High Speed Balanced Crank
GRP Billet Aluminum Rods
ARP Rod Bolts
Race Balance Shaft Eliminator Kit
Clevite 77 Main Bearings
Clevite 77 Rod Bearings
O-Ringed Block
ARP Main Studs
ATI Super Damper

Fully polished and ported race head
Competition Copper Alloy valve seats
Five angle valve job
Ferrea dual valve springs
Ferrea titanium valves +1mm
Ferrea titanium retainers
Ferrea valve keepers
Ferrea spring seats
Ferrea spring locaters
Ferrea valve guides
ARP L19 Head studs
Kelford 280 cams
Titek Carbon Fiber Cam Gear cover

Agency Power Polished Billet Aluminum Motor Mounts
Agency Power Polished Billet Aluminum Trans Mount
Greddy Chrome Billet Oil Cap
Weapon-R Aluminum Catch Can
818 Billet Power Steering Cap
Powdercoated Blue Valve Cover
Polished A/C System
Polished Aluminum Thermostat Housing
Engine Bay Painted Body Color
Every cosmetic bolt changed Stainless Allen Bolts

AMS Custom Made Short Runner VSR Race Intake Manifold
BBK Throttle Body
Battery relocation kit to trunk


TURBO/COOLING:
Precision 6262 Billet Wheel Dual Ball Bearing Turbo
Polished and Shaved Compressor Housing
Virtual Works Polished Stainless Steel O2 Housing
DEI Titanium Turbo Heat Shield
Full Race T3 Turbo Manifold Jet Hot Coated
Tial 44mm Wastegate
Tial Blow Off Valve
Fluidyne Aluminum Radiator
Blitz 1.3 bar cap
Extreme Turbo Systems Black Anodized 3 ½ inch Front Mount Intercooler
Polished Aluminum Intercooler Piping
Virtual Works IC Pipe Strapping
Virtual Works Aluminum 4 inch intake
K&N Air Filter
APR Carbon Fiber Cooling Plate
Mishimoto Race Thermostat
Polished Aluminum Thermostat Housing
Weapon-R Coolant Tank
Virtual Works Racing Modified Breather Can
Virtual Works Racing Polished Upper Radiator Hard Pipe
Virtual Works Racing Polished Lower Radiator Hard Pipe
Spal 10inch Low Profile Electric Fan


FUEL:
Full Blown Double Pumper System
AMS Black Anodized Fuel Rail
Precision 1200cc Injectors
Custom-10 fuel lines
Aeromotive FPR


TRANS/CLUTCH:
Shepherd Racing Stage 2
New throwout bearing
New clutch fork, pin and return springs
New speedometer gear and sensor
New slave cylinder and line
REM ISF hub/sleeves and shifter rails
REM ISF gearset with rails and hub/ sleeves
Double synchro 5th gear option

Shepherd Racing Stage 3 Transfer Case
Quaife LSD front differential
8mm to 10mm bolt upgrade
New seals and o-rings
Reshimming
Neodymium magnet
REM ISF Process
New ring and pinion with bearings

Exedy Wasabi Triple Ceramic Clutch
Hyper Multi Plate

B+M Short Throw Shifter
AMS Billet Shifter Bushings
ARC Titanium Shift Knob


WHEELS/SUSPENSION/BRAKES:
Volk Racing RE30 Matte Black 18X9
Volk Black Duraluminum Lug Nuts
Volk Black Duraluminum Value Stems + Caps
Volk GT High Center Caps
Advan Neova AD07 265/35/18
Tein Monoflex Coilovers
Tein Upper Pillow Ball Mounts with Camber Adjustment
6 Piston Stoptech Front Big Brake Kit
GT Spec Front Strut Bar
Cusco Rear Strut Bar
Agency Power Front + Rear Sway Bars


ELECTRONICS:
AEM EMS
AEM 5 Bar Map Sensor
Defi Water Gauge
Defi Exhaust Gas Temp Gauge
Defi Oil Temp Gauge
AEM Wideband
AEM Boost Gauge
Sparktech Coil On Plug Ignition System
Titec Carbon Fiber Fuse Box cover
Trunk Relocated Battery

Alpine Head Unit
Alpine Tweeters
Alpine Mids


EXTERIOR:
Chargespeed Type 1 Front Bumper
Carbon Fiber Front Bumper Diamond
Chargespeed Type 1 Side Skirts
Chargespeed Type 1 Rear Bumper
Chargespeed Vortex Generator
Seibon Carbon Fiber TSII Hood
Carbon Fiber Evo 8 Trunk Badging
Carbon Fiber Rear Diamond Badge
Rexpeed Carbon Fiber Mirror Covers
Rexpeed Carbon Fiber J-Panels
Varis Carbon Fiber Exterior B-Panels
Rexpeed Carbon Fiber Antenna
Hyboost Performance Edged + Tinted headlights
Hyboost Performance Tinted taillights
Hyboost Performance Smoked Side Markers
Freshly Painted BBY


INTERIOR:
Evo SE Suede/Leather Front and Rear Seats
Rexpeed Carbon Fiber Dash Kit
Carbon Fiber Console Shifter plate
Tyrant Carbon Fiber Armrest
Brand New OEM Mats

 

sup man i was waiting for you to bring it back from the dead lol. Looks like what i am going for in the engine chrome look. Couple questions for you bro. Btw thanks for the buschur t/b helping out my massive engine build.

1. the upper radiator pipe(chrome) you had to weld a extra inch or two to get it to fit like that correct? Anyways is it possibe i could get one for my build looks nice upper and lower

Virtual Works Racing Polished Upper Radiator Hard Pipe
Virtual Works Racing Polished Lower Radiator Hard Pipe

whats price and all involved to make it fit.

2. the blue hose coming from the top radiator nipple what kind of hose is that and can i get some of it for my build. All i can find was jegs fluid hoses i got on mine. but i want more of a dark blue like yours.

I was not really feeling the front till i looked at it i see why you did not cf the MIts symbol wanted to keep the chrome theme going on

 

I can get those upper and lower radiator hard pipes made for you if you like. I think they are around $425 for the set. They can make them to fit your stock radiator outlet, but it looks so much better this way. They are polished stainless steel BTW.

The blue hose is from Pep Boys ironically enough. It was the only hose I could find long enough at 9pm, and it worked out fine. It's not a very durable hose and I may change it out but it worked at the time for sure.

BTW, the mitsu diamond on the nose is carbon.

 

i never liked this color but this tread looks good

 

I think it's all in how it's presented. With all black accents it look great in my opinion.

 

You guys have such nice cars!

Jealous!

Im going to be driving soon (VERY EXCITED) But i cant afford a evo, best i can get is prob and 08-09 GTS or a OZ rally. haha.

 

never was a real fan of bby but man there are some absolutely beautiful cars in here!

 

bby is the color of the gods. I cant wait till i complete my motor build so i can put rest of exterior peaces on then ill add to this thread

 

She made 710awhp and 570awtq on the wastegate at 18psi..... MUCH more to come.

 

nice impressive thats stronger then the silver one you have for now