CBRD- new project 2.3.... ;)
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
ok guys....
we just got confirmation on the MOTON Dampers....
they are the motorsport Doubles, not the clubsports like GSC and others have run. Im not sure if anyone else has them....
This should spell great things for us on Evo suspension development... going to be using hyperco springs and whiteline mounts..... with all whiteline bushings....
the fun starts soon!!
cb
we just got confirmation on the MOTON Dampers....
they are the motorsport Doubles, not the clubsports like GSC and others have run. Im not sure if anyone else has them....
This should spell great things for us on Evo suspension development... going to be using hyperco springs and whiteline mounts..... with all whiteline bushings....
the fun starts soon!!
cb
ok guys....
we just got confirmation on the MOTON Dampers....
they are the motorsport Doubles, not the clubsports like GSC and others have run. Im not sure if anyone else has them....
This should spell great things for us on Evo suspension development... going to be using hyperco springs and whiteline mounts..... with all whiteline bushings....
the fun starts soon!!
cb
we just got confirmation on the MOTON Dampers....
they are the motorsport Doubles, not the clubsports like GSC and others have run. Im not sure if anyone else has them....
This should spell great things for us on Evo suspension development... going to be using hyperco springs and whiteline mounts..... with all whiteline bushings....
the fun starts soon!!
cb
When are you getting the flat pad/scales?
Evolving Member
Joined: Aug 2006
Posts: 112
Likes: 0
From: Australia
Ditto on some more pics for the bodywork progress. I've started similar bodywork (from what I can gather of what you've been doing) on my own car here in Australia.
Brilliant work guys. The attention to detail is excellent. It's inspiring to see someone else putting so much effort into every fine detail.
Brilliant work guys. The attention to detail is excellent. It's inspiring to see someone else putting so much effort into every fine detail.
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
more pics shortly, the bodywork to finish the front fenders will be taking place shortly, and we will then be fabbing the intercooler tanks, piping etc, with our friends at Blouch Turbo...
The paintwork will then be done after the fab work... we are going to do a private shakedown test of the car in late april.
cb
The paintwork will then be done after the fab work... we are going to do a private shakedown test of the car in late april.
cb
I have a CD full of CFD studies of underbody aero, some stuff from prodrive and a couple of lmp teams.....
we have a nice resourceful group of people to ask questions
I did follow the evolution of the corvette's rear undertray.... ACO's regs are kind of goofy on the floors, I'd be curious to see the entire flat bottom.... maybe i should sneak into pratt&miller with a little camera.
cb
we have a nice resourceful group of people to ask questions
I did follow the evolution of the corvette's rear undertray.... ACO's regs are kind of goofy on the floors, I'd be curious to see the entire flat bottom.... maybe i should sneak into pratt&miller with a little camera.
cb
no seriously!
Account Disabled
Joined: Feb 2008
Posts: 111
Likes: 0
From: santa clarita
great job guys....alot of of love!
ca'nt wait to see the first run.
good luck,your the man!
http://www.driftnks.com
ca'nt wait to see the first run.
good luck,your the man!
http://www.driftnks.com
Thread Starter
Account Disabled
iTrader: (60)
Joined: Dec 2004
Posts: 7,363
Likes: 8
From: york, pa 17402
well, we have seen alot of improper utilization of aero on alot of cars that compete in these series... mainly at the front of the car, but also at the rear....
Ill have some pics of what we do shortly...
we are running the motons with a special spring package to try to keep good platform in the car to make as much aero as possible...
cb
Ill have some pics of what we do shortly...
we are running the motons with a special spring package to try to keep good platform in the car to make as much aero as possible...
cb
CBRD FTW!!! I really like the organization, cleanliness and structure of your place man (and trust me, coming from someone as OCD as me, that's a top notch complement). You need to make an auto-mailing list or something for events your cars will be in. I'm sure some people would want to know in advance when/where you're going to run your cars. 'CBRD track-day tracker'.... I'm game