ok I am very interested in doing my light housings black, and just the matte balck housings and tails i wanna copy the mr lights, and I have been reading but alot of people are hush hush to keep their process secret to make money, and i respect that, just I am on a low budget and would like black housing lights, so i would likw some help, AKA possible to not dremel, or possible to not bake (I have a heat gun) and I woulod just like some straight answers.
I need :

1. How to separate lens off of headlight & taillights

2. paint for the amber strip on the taillights

3. Any kind of help and light on the bashing.

Thanks to all who help, i did use the search button and none of the threads i found are straight up, so please please help.

 

here ya go bro... next time search a little harder... look in the how to section//----

rear tail lights---https://www.evolutionm.net/forums/evo-how-tos-installations/406606-how-open-tail-lights-without-dremel.html


front-- headlights----https://www.evolutionm.net/forums/evo-how-tos-installations/78174-how-headlight-blackout.html


and all of the how too's

https://www.evolutionm.net/forums/ev...-exterior.html

/thread

tips
bake the headlights... easier gets heat all around put a wet towel and put the light lens face down .. heat gun will cause unevenness.. and most like end up getting fog in them later on bc uneven taking them apart..

tail lights ---take your time its a painful process... i did mine ...did well on the 1st one and messed up on the 2nd bc i was tired and rushing do it when u have time!

 

https://www.evolutionm.net/forums/ev...ht-detail.html

https://www.evolutionm.net/forums/ev...-blackout.html

learn how to use the search feature better

 

sorry ill try ^^ but one thing I didnt see in any of those is what color to use on the amber part when copying the mr tails?

 

search first

closed...