93 octane and the car will prob weigh 2700 lbs id guess with all the weight reduction maybe less ill have to weigh it when im done with it. We dont have e85 in tampa so i prob wont run it. Ill prob buy a jug of race gas and just keep throwing it in each time i go out since this is strictly a weekend driver

Wanna drive 3 hours so I can see your ride in person

Haha Might have to pass on that

Worth a try..maybe I'll end up going to Tampa for an Event or something, hopefully you'll be there.

Yeah i try to make it out to every meet that is held unless the car is down for some reason

Alright, it would have to be a week-end thing for me or has to be a big meet

yah 9s on 93 pump at 2700 seems difficult. I hope you get it!

The car trapped 123.3 mph and went 11.1 with the fp red setup making 445awhp and that was the run i blew my motor 2/3 way down the track. It was going to be at least a 10.8 pass if the motor didnt let go! And now with 200 more hp to the wheels when we are done tuning i think it has it in it!

my car weighed 3230 with me in it and about 550whp my car went 10.7 @ 128. With 800whp and 2700lb car you will definitely go 9s if you can get the power to the ground and you can drive.

im selling my rpf1's so i can rock some Rota Slipstreams with some nasty drag radials that i can also use on the street as well and i believe the car will be under 2700 lbs when im done with it!

Who did the port work on your head?
Your build looks great.

Machine shop in CT not sure the name but its where my friend Raif gets all his evo and talon race motors built so i trust him!

Thank you sir ill try to get some more pictures of the car with the carbon hood and trunk that are going on this weekend and hopefully i have time to throw my temporary suspension on

I'm aiming for 9's with 412 whp at 2530 pounds this year, so I definitely think you can pull it off. The best mod you can possibly do is practice, practice, and then some more practice!!

-mark

Three deep, made a quick pull on WG Spring. Still have a ton of room.

Should be getting the pump gas finished up this weekend!