My JDM VII Lag Monster from Aus
My JDM VII Lag Monster from Aus
Hi all been on this forum for a while just lurking around and checking out some of the crazy Evos that are out there. I Have learnt a lot from this website and still learning. Well heres the spec of the car when I got it.
Engine
ARD 2.3L crankshaft
Mahle pistons
Spool H beam rods
Ralliart headstuds
Brian crower valve springs & retainers
hydraulic lifters (non ticking ones)
780cc Siemens injectors
Walbro 255 fuel pump
Okada coil packs
Ralliart ignition leads
HKS 272 cams in/ex
HKS timing belt
HKS M40 spark plugs
Bigger oil cooler
TD06SL2R 20G Turbo
Apexi air intake & enclosure
Greddy upper intercooler pipe
GFB Deceptor Bov
GrimmSpeed 3 port boost controller
Metal intake pipe
Cusco oil catch can
Haltech PS1000 ECU
Exhaust
Tomei dump & front pipe
TurboXS Hi flo cat
3" Catback
Supension
Whiteline Swaybars with endlinks Front and rear
Tein S Tech Springs
Brakes
DBA 4000 front/rear
EBC red stuff front/rear
Resprayed Brembo in White with black lettering
Exterior
Carbon fiber spoiler blade
Blacked out headlights
Enkei tarmacs 17x8 Kumho KU31 235/45/17 painted black
Evo 8MR tailights
Interior
Haltech Shift light
Defi boost gauge and control unit 2
Carbon fiber overlay on Door switches, center consoles and steering wheel.
B&M short shift kit
Atm shes running only 20psi making 248awkw/333awhp 492nm/363 ft lb awtorque, coming from a Lancer this is more than enough power I can handle. Once i get the hang of it Ill start playing around with the power. since the car has enough performance mods the only thing I focus on now is the looks and learn how to drive it. well heres some picture of it: (sorry for the crappy iphone pics)
When I got it


then rear wing put back on with a CF blade and the 8MR taillights

I painted this White

but realised its a ***** to keep clean so then I changed it to this

Brembos was peeling and turning pink so I painted it White too


Painted the chrome headlights to black

Painted the Enkei Tarmacs black with red lettering to bring out the White Brembos

Installed the Tein S tech

Heres what it looks like now







Future plans
-wind up boost
-Proper photoshoot
Enjoy
Engine
ARD 2.3L crankshaft
Mahle pistons
Spool H beam rods
Ralliart headstuds
Brian crower valve springs & retainers
hydraulic lifters (non ticking ones)
780cc Siemens injectors
Walbro 255 fuel pump
Okada coil packs
Ralliart ignition leads
HKS 272 cams in/ex
HKS timing belt
HKS M40 spark plugs
Bigger oil cooler
TD06SL2R 20G Turbo
Apexi air intake & enclosure
Greddy upper intercooler pipe
GFB Deceptor Bov
GrimmSpeed 3 port boost controller
Metal intake pipe
Cusco oil catch can
Haltech PS1000 ECU
Exhaust
Tomei dump & front pipe
TurboXS Hi flo cat
3" Catback
Supension
Whiteline Swaybars with endlinks Front and rear
Tein S Tech Springs
Brakes
DBA 4000 front/rear
EBC red stuff front/rear
Resprayed Brembo in White with black lettering
Exterior
Carbon fiber spoiler blade
Blacked out headlights
Enkei tarmacs 17x8 Kumho KU31 235/45/17 painted black
Evo 8MR tailights
Interior
Haltech Shift light
Defi boost gauge and control unit 2
Carbon fiber overlay on Door switches, center consoles and steering wheel.
B&M short shift kit
Atm shes running only 20psi making 248awkw/333awhp 492nm/363 ft lb awtorque, coming from a Lancer this is more than enough power I can handle. Once i get the hang of it Ill start playing around with the power. since the car has enough performance mods the only thing I focus on now is the looks and learn how to drive it. well heres some picture of it: (sorry for the crappy iphone pics)
When I got it


then rear wing put back on with a CF blade and the 8MR taillights

I painted this White

but realised its a ***** to keep clean so then I changed it to this

Brembos was peeling and turning pink so I painted it White too



Painted the chrome headlights to black

Painted the Enkei Tarmacs black with red lettering to bring out the White Brembos

Installed the Tein S tech

Heres what it looks like now







Future plans
-wind up boost

-Proper photoshoot
Enjoy
Last edited by ppch8; Nov 18, 2011 at 05:50 PM.





