Insane Speed built 4G64 2.2L
#1
Evolving Member
Thread Starter
iTrader: (31)
Join Date: Sep 2006
Location: Las Vegas
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Insane Speed built 4G64 2.2L
709hp and 540tq at 30lbs
http://youtu.be/s8eE9SIMbyU
http://youtu.be/EgkSw5XSYZI
I think my build thread is way overdue. The car has been on the road for a few months now but I’m still waiting on my fuel system ( pumps & hard lines) then I can turn up the boost and get it tuned. The long rod 4g63 motor that was built in my other thread spun a main bearing from a bad oil pump and a few other things. This is a complete new block and head built by Mike Angle at Insane Speed in Las Vegas. Here’s the build details with some pictures.
2006 Evolution 9 MR 5 speed swap
ENGINE
4G64 Long Rod 2.2L
MAP Feed line
Cometic Head Gasket
CP Pistons (Insane Speed spec.)
Manley Turbo Tuff Long Rods
Manley 94mm Crank
MAP L19 Head Studs
ARP Main Studs
Balance Shaft Delete
Clevite Race Main Bearing
Clevite Race Rod Bearing
MAP Water Pump Spacer
OEM Water Pump
OEM Oil Pump
STM B&M Oil Cooler
GT3582R
Turbosmart Race Port BOV
Turbosmart hyper gate wastegate
AMS F1 Intake manifold
Bommba 75mm TB
HEAD
Evo 9 Insane Speed CNC Ported Head
GSC S2 Cams
AEM TRU Time Cam Gear
Ferrea Bronze Valve Guides
Ferrea Dual Valve Springs
Ferrea Oversized Valves
FUEL
FIC 2150cc
FIC Fuel Rail
Fuel Lab FPR
BR Double Pumper
Custom feed line coming soon
MODS
SE Evo 9 Seats Front and Rear
CM Twin Disk Clutch
ETS 3in. Exhaust
AFI T3 mainfold
AFI 3in. V-band o2 housing
Custom 3in. V-band downpipe
Insane speed 3" UICP 2.5" LICP
BC coilovers
WR Engine Damper
ZT-2 LCD Wideband/ Boost Gauge/ EGR
MR Gauges Volt/Oil Temp/Boost
RPF1's with 265/35/18's
HEAD Pics
Motor build @ Insane Speed
Other pics
Motor Install
Race wheels/ Tires
THANKS TO
INSANE SPEED
FIC
AFI
SPARK TECH
MAP
http://youtu.be/s8eE9SIMbyU
http://youtu.be/EgkSw5XSYZI
I think my build thread is way overdue. The car has been on the road for a few months now but I’m still waiting on my fuel system ( pumps & hard lines) then I can turn up the boost and get it tuned. The long rod 4g63 motor that was built in my other thread spun a main bearing from a bad oil pump and a few other things. This is a complete new block and head built by Mike Angle at Insane Speed in Las Vegas. Here’s the build details with some pictures.
2006 Evolution 9 MR 5 speed swap
ENGINE
4G64 Long Rod 2.2L
MAP Feed line
Cometic Head Gasket
CP Pistons (Insane Speed spec.)
Manley Turbo Tuff Long Rods
Manley 94mm Crank
MAP L19 Head Studs
ARP Main Studs
Balance Shaft Delete
Clevite Race Main Bearing
Clevite Race Rod Bearing
MAP Water Pump Spacer
OEM Water Pump
OEM Oil Pump
STM B&M Oil Cooler
GT3582R
Turbosmart Race Port BOV
Turbosmart hyper gate wastegate
AMS F1 Intake manifold
Bommba 75mm TB
HEAD
Evo 9 Insane Speed CNC Ported Head
GSC S2 Cams
AEM TRU Time Cam Gear
Ferrea Bronze Valve Guides
Ferrea Dual Valve Springs
Ferrea Oversized Valves
FUEL
FIC 2150cc
FIC Fuel Rail
Fuel Lab FPR
BR Double Pumper
Custom feed line coming soon
MODS
SE Evo 9 Seats Front and Rear
CM Twin Disk Clutch
ETS 3in. Exhaust
AFI T3 mainfold
AFI 3in. V-band o2 housing
Custom 3in. V-band downpipe
Insane speed 3" UICP 2.5" LICP
BC coilovers
WR Engine Damper
ZT-2 LCD Wideband/ Boost Gauge/ EGR
MR Gauges Volt/Oil Temp/Boost
RPF1's with 265/35/18's
HEAD Pics
Motor build @ Insane Speed
Other pics
Motor Install
Race wheels/ Tires
THANKS TO
INSANE SPEED
FIC
AFI
SPARK TECH
MAP
DYNO NUMBERS AND MORE PICTURES COMING SOON
Last edited by teribble; May 2, 2012 at 12:32 PM.
#7
Evolving Member
Thread Starter
iTrader: (31)
Join Date: Sep 2006
Location: Las Vegas
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Thank you
That's coming soon
Yeah, The car was down for way too long!! It's been on the road for a few months just been too busy to post anything.
I either going to upgrade my turbo to the HTA3586 or get a 6266 and plan on make 700+
That's coming soon
Yeah, The car was down for way too long!! It's been on the road for a few months just been too busy to post anything.
I either going to upgrade my turbo to the HTA3586 or get a 6266 and plan on make 700+
Trending Topics
#9
Evolving Member
Thread Starter
iTrader: (31)
Join Date: Sep 2006
Location: Las Vegas
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Thank you, I'm thinking about getting my valve cover powder coated a different color I'm not sure what will look good with the black BOV and wastegate. I'm open to ideas
#10
Evolving Member
iTrader: (7)
Join Date: Sep 2004
Location: Irvine, CA
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
def very nice, i wanted to visit the shop when i was there this past weekend but simply not enough time. that shop produces some very stout cars. i can't wait to see the vids (street pulls specifially) and read/hear/see the power!