Petition to STOPTECH
Originally Posted by tsi90awd
FWIW, I got the BAER Eradispeed 2-piece rotors recently and have used them at both Blackhawk Farms race track and at an autocross with DS2500 pads. They fit and work great.
i'd like to see it happen but i don't think they'll waste their time. gyrodisc, pf, baer, and now i hear wilwood... stasis, ap, they all make replacement two piece rotors. this is not even mentioning the japanese companies like project mu and endless.
but i would like to see it happen cuz outta all these other brands the stoptechs would be the lightest. if they can make an oversized rotor weigh 13.4 or whatever pounds... then imagine what they could make a stock sized rotor weigh... sigh... you could save 10 pounds per corner or more.
but i would like to see it happen cuz outta all these other brands the stoptechs would be the lightest. if they can make an oversized rotor weigh 13.4 or whatever pounds... then imagine what they could make a stock sized rotor weigh... sigh... you could save 10 pounds per corner or more.
Evolving Member
Joined: Oct 2002
Posts: 362
Likes: 0
From: Northern Michigan
Originally Posted by 954DRGSR
How is the noise with the those rotors & pads?
Originally Posted by tsi90awd
After the HPDE at Blackhawk, I've got a bit of squeaking, but it is coming from the rear brakes. Those also have Ferodo pads, but the stock rotors. No noise from the front.
Evolving Member
Joined: May 2005
Posts: 354
Likes: 0
From: NorCal
dont forget that RRE has two piece floating replacement rotors too... http://www.roadraceengineering.com/evo.htm
Account Disabled
Joined: Oct 2003
Posts: 67
Likes: 0
From: Charlotte, NC
Hi guys,
I just wanted to let you know that we're listening to your feedback. If we see enough demand, we'll make them. If we did this, pricing would most likely be similar to what we sell for the 350Z Track Model and Brembo equipped G35's. They wouldn't be cheap, but they would be the best on the market. Here's a link:
http://www.stoptech.com/press_releas...drkrelease.htm
The main issue however is that our minimum run would need to be in the hundreds of sets to justify the design and tooling costs. If you guys and a couple hundred of your close personal friends want to place a non-refundable order, we can press this issue forward for sure.
Seriously though, we are keeping our hand on the pulse on this product. Keep giving us feedback. Thanks.
Jeff Ritter
Sales Mgr. StopTech
I just wanted to let you know that we're listening to your feedback. If we see enough demand, we'll make them. If we did this, pricing would most likely be similar to what we sell for the 350Z Track Model and Brembo equipped G35's. They wouldn't be cheap, but they would be the best on the market. Here's a link:
http://www.stoptech.com/press_releas...drkrelease.htm
The main issue however is that our minimum run would need to be in the hundreds of sets to justify the design and tooling costs. If you guys and a couple hundred of your close personal friends want to place a non-refundable order, we can press this issue forward for sure.
Seriously though, we are keeping our hand on the pulse on this product. Keep giving us feedback. Thanks.
Jeff Ritter
Sales Mgr. StopTech
Account Disabled
Joined: Oct 2003
Posts: 67
Likes: 0
From: Charlotte, NC
All of our 2-piece Direct Replacement Kits with aluminum hats are AeroRotors...so yes, if we made them, they would have our proprietary internal vane design (same vanes as the rotors in our BBK's).
I'm glad you're enjoying your kit on your 3G, thanks for the compliment.
I'm glad you're enjoying your kit on your 3G, thanks for the compliment.
