Serviced one Proflex damper
Feb 11, 2002, 01:29 PM
#1
Evolved Member
Thread Starter
Join Date: Nov 2001
Location: Germany
Posts: 827
Likes: 0
Received 0 Likes
on
0 Posts
Serviced one Proflex damper
I've been a busy Evo owner over the weekend 
Took apart my front right Proflex damper (took 2:30 hours with two people, the next one would have taken about 1:30
) And found that there wasn't much dirt in it at all. Lots on the top and the grease on the seal was quite dirty, but looked like there wasn't any bigger particles in the damper itself. It was a bit rusty on the inside (probably from standing still for a long period) but otherwise o.k.. Don't know if I should service the other one now.... (i.e. lots to do this week before driving to MC 
)
Took apart my front right Proflex damper (took 2:30 hours with two people, the next one would have taken about 1:30
) And found that there wasn't much dirt in it at all. Lots on the top and the grease on the seal was quite dirty, but looked like there wasn't any bigger particles in the damper itself. It was a bit rusty on the inside (probably from standing still for a long period) but otherwise o.k.. Don't know if I should service the other one now.... (i.e. lots to do this week before driving to MC )
