Guys,

How would you rate these Front Lower Arm Brace/Bar ? In term of performance ?

1. Beatrush
2. Carbing
3. Cusco (I+II)

Beatrush (4 points)

Carbing (6 points)

Cusco (I+II = 6 points)

 

i have the carbing 6 point and gona fit it this week, i'll let you know

 

On street tires i cant tell a difference in the cusco 1 and 2 being off the car

 

can anyone confirm if any of these will fit a 3" downpipe?

i have been thinking about getting one of these, but want to make sure it is going to fit my invidia before i purchase.

 

Most of them will clear 3 inch dp. If not, you can always use small spacers to clear.

 

Carbing is designed for their 80MM downpipe so it should fit.

 

The nice thing about the Cusco V1 and V2 bars is that the V1 bar picks up the forward bolt of the lower control arms, ties them together and to the chassis point. This seems like a smart idea. Of course it's a bit of a pain because the passenger bolt doesn't come out without removing the oil filter and the downpipe doesn't come off without removing the V1 bar. So be sure you want to do an oil change any time you take it off.

I also have the Beatrush lower bar that picks up another point in the front control arm and ties it to the chassis. Those control arms ain't going anywhere

 

Just installed the Carbing 6point...No matter how I tried it 1 hole would not line up right so I had to drill it...It does fit my 3" downpipe though, but my cat sits on it

 

anybody used this beatrush brace?

 

Here's a review from evom's project EVO on the Beatrush 5pnt. unit :

https://www.evolutionm.net/features/article.php?id=82