drop24

Bumping an old thread. I'd like to see if 18x9.5 +20 rub on the stock front fenders? I'm on swift springs. My rear fenders are rolled so they should be ok right?

RavSpec

iTrader: (80)

Depends on how much negative camber you're willing to run and what tire you plan on using.

You'll need to use the +20mm front, but it is recommended to use +30mm rear with 18x9.5

Please PM us if you need more info, Thank you.

indohin

iTrader: (1)

Yes.. They do rub on stock fenders. I had my chamber set between 1.5 to 2 (I did 3 aligments) with 1 1/2 finger gap. I ended up rolling and pulling both front and back. If you want to keep it stock go with +29 (of course it will depends on your tire models, sizes, walls etc.) Hope that helps

drop24

My rear fenders are already rolled. I'd like to run 255/35/18 with -1.0 camber in the rear. Can I get away with +20 offset in the rear with that setup?

RavSpec

iTrader: (80)

+20 will not work in the rear, the 9.5 may even rub with a +30.

Thank you.

drop24

Ok, I'm going to go with the staggered setup +20 front +30 rear. Thanks.

dorby

love the works!!!

sing1002

looks great. PM me a price for 18x8.5 +22

RavSpec

iTrader: (80)

Offset not available, sorry.

http://www.workwheelsusa.com/media/w...Kai%20Spec.pdf

Thank you.

Wicked E

iTrader: (26)

PM price for 8.5 Gunmetal shipped to 80951.

Thanks!

-E

RavSpec

iTrader: (80)

18x8.5 + 20mm Kai is now discontinued, +25mm is the lowest offset now available.

I'll pm you, Thanks.

bluemonster2

iTrader: (12)

by far the best wheels ever. i love them

SevenSins

i have work cr-kais 17x9 +17 and they fit fine with 245, 235's = no rubbing at all......and stock camber

IceHawk

iTrader: (11)

What do the 17x9's weigh?

stp

Onn european models the offset is 35-45 and 18x8,5 WORK EMOTION wheels will go perfectly with an offset of 30 if I am correct