evo.ix.mr.2006

Hi,
I want to get a set ce28n in 17's but i need some help in your opinon to get a certain look.

1st - i want the spokes to have a little concave look, and it need to clear the brembo brakes without the need for spacers, so what offset do i need +22, +28,+35)?

2nd - i want the the 17's including tires to be flushed with the stock fender so how wide the rim should it be (17x8.5, 17x9, 17x9.5) rolling fender i'm willing to do as long the rims and tires don't protrude from the fender?

the pix below is a prime example





thanx

ultradef

iTrader: (1)

17x9.5 +28 will be a flush fitment that will allow you to run wide tires (265+), but I'm not sure how concave the spokes will be. 17x9.5 +22 will be the most flush (and concave), but you'll likely have to run stretched tires, roll your fenders, etc.

If I had to guess, I'd say the above picture is a 17x9.5 +28 (judging by the non-stretched tires and non-rolled rear fenders).

Evil Evo8

He also has wide fenders up front too, but I think that 17x9.5+28 should be fine..... all u just need to do is rolling your fenders.

ak47po

iTrader: (3)

17x9 +35 stock suspension flush with fenders.