boostedtres

iTrader: (4)

dont have any pics of 20mm spacer in the front 38 rear on the computer. may have some on the cell. if you want some specific shots lmk I might be able to email/text you a couple if you want, here to help any way I can. cheers guys

jattDevo

Hey guys, I am about to buy some set of wheels, but before I do so I wanted to ask you guys first if you guys think that it will fit my evo 8. so far its stock and will be dropped a little in a while.

This is the size n make.
Rays Gramlights
57 maximum
Front 18x8.5 +45
Rear 18x9.5 +38

Any help will greatly be appreciated. Thanks :-)

BenJ

iTrader: (21)

No good. The front offset is too high and you don't want to run different widths front and rear...although some racers do run a wider wheel up front then in the rear.

evoevo10

iTrader: (4)

Will 255/35 18 Spec Stars on a 18x9.5 +20 fit without rubbing. I am on coilovers and can run some negative camber.

awdboosted

iTrader: (30)

Enkei 18X9.5 38mm offset (front and back)
Dunlop Star spec 275/35 18

Spacers: 20mm spacer in front and none in the back
Mods: Rolled Fender in the rear

I may add a 3mm spacer in the rear because it does rub the trailing arm

Alignment
Front-
Camber: 3.5+
Rear-
Camber:1.8+

kaymin

iTrader: (11)

It'll rub if you haven't atleast rolled the rears, may need to pull them a bit depending on your ride height and alignment.

evonky

iTrader: (5)

Anyone running a rim this size with this offset and have any issues with?? I can get a good deal on some rims this size so I am in a hurry for an answer thanks in advance guys!!

EDIT----- + 25 mm offset sorry guys

recompile

iTrader: (38)

I'm no wheel expert, but I wouldn't expect it to clear the front Brembo's without spacers. Generally we need at least +30 offset up front, at least from what I've seen.

Vehicle336

I'm running a 17x9 with a +27 offset, clears all day long. MB weapons.

PCSkiBum_21

iTrader: (1)

^ I have those same wheels for rains in 18", they clear my brembo bbk as well. also have fit 18x9.5 +20 on stock fenders (rolled) with no rubbing and obviously also clears brakes.

nismos13sleeper

check the chart but seems like they answerd the question

kamote2000

iTrader: (7)

I just got my set of work 11r for my evo9 MR today and i was wondering if i would have any rubbing issues on the front. the wheels that came are 18X8.5 offset 38. im currently running on a set of tein type flex coilovers, and im planning on putting 245/40R18 tires. i also want to know if there would also be rubbing issues on the stock MR bilsteins. i test fitted the front wheel and am a little bit worried that they seem so close to the base of the coilovers and was wondering if 245's wont be wont be an issue. thanks a lot for the help....

chu

iTrader: (72)

^^^Should be fine

snafufx

iTrader: (14)

Rota Grid 18x9.5 +20, what size of tire would I need to run these with minimal fender rolling?
Rota G-Force 18x9 +30, same question.
I don't want the tires to stick out too much, more flush would be perfect. Dropped on Function Xs coilovers. Any spacers needed? Thanks

ArmedEscort

iTrader: (2)

So i got in touch with the US distributor of Compomotives and I can get a 17x8 TH1 in all most any offset. So my question is: what would be a flush offset for a 17x8 wheel? I was told they make them as low as 15 btw. I need to clear my stock calipers.