285/30 or 265/35 18 federal rs-r?
#1
285/30 or 265/35 18 federal rs-r?
Is there anyone who runs these tires? I'm wondering if one size vs the other has a benefit on a 10" rim. I would prefer the shorter tire personally but I have an ix/rs and I don't want to work against myself gearing wise for ax.
Opinions?
Opinions?
#5
Evolved Member
How about 275/35/18??Those should seat nicely on 10" wheel and you get a tad taller tyre than stock
Trending Topics
#8
Evolved Member
iTrader: (36)
My advice is to go with the 265's. The Federal RS-R is a pretty wide tire and I firmly believe the size ratio on the sidewall isn't accurate. I currently have a set of 235/45/17's on my stock BBS Evo IX SE rims and they are a lot wider than the OEM Advan's. They're just as wide as my buddies 255/40/17 NT05's. Here is a thread I found a while back comparing 255/40/17 NT05's to 255/40/17 RS-R's. You'll notice how much wider the Federals are over the Nitto's even though they're both rated 255mm wide. It almost seems like 255mm wide Federals could really be 265-275mm wide. So I would assume that the 265 wide RS-R you're looking at is more like a 275mm tire while the 285 could be upwards of 295 or 300ish.
https://www.evolutionm.net/forums/mo...-595-rs-r.html
https://www.evolutionm.net/forums/mo...-595-rs-r.html
Last edited by e_kobz; Mar 4, 2014 at 06:50 AM.
#12
Evolved Member
iTrader: (36)
Well in that case you should run the 285's I thought you were trying to fit these under the stock fenders. Those AIT fenders are really wide. Remember my buddies Evo that I showed you, he's on 18x11 rims with 305's and he still has room to spare. Go bigger if you can. I just thought you were trying to squeeze them under the stock fenders.