60 whp gain After DG Tune!
HAHA that's a priceless picture! I was setting up the map for the white evo x and kept getting sidetracked by you guys!
As far as the T-bolts go that shouldn't be a problem, I can stop down at my local sk speed shop. Do you plan on having us do the install? I am assuming I will be installing the wga. Getting the pre-load setup properly will go much easier when I have the car strapped down on the dyno
As far as the T-bolts go that shouldn't be a problem, I can stop down at my local sk speed shop. Do you plan on having us do the install? I am assuming I will be installing the wga. Getting the pre-load setup properly will go much easier when I have the car strapped down on the dyno
Evo a Mula- Yea, definately a fun day. I'm not worried about 335's anymore BUT they are doing some heavy modding as well so my test pipe and wga and LIC pipes are going in next. Then a follow up tune 
Actually P, can you order those T-bolt clamps for me for the next time I come in? I'm going to be ordering that wga next week.
Forgot this pic, J (red x owner) taking aim @ all those non modded whips out there with his Bushur cannon!
Actually P, can you order those T-bolt clamps for me for the next time I come in? I'm going to be ordering that wga next week.
Forgot this pic, J (red x owner) taking aim @ all those non modded whips out there with his Bushur cannon!
Can anyone guess what motor that is all built and wrapped up on the engine stand in the back?
That is the boost spike, but due to not having adequate "T-bolt" clamps, he would spring a small boost like right after the initial 25psi spike which would make boost taper off more harsh. I can assure boost holds a solid 25psi now until about 6500 where it tapers off to red line
He only has the thin worm clamps all around right now. Pops hoses off like crazy!
He only has the thin worm clamps all around right now. Pops hoses off like crazy!
https://www.evolutionm.net/forums/ev...hp-320wtq.html
In the linked car there is a torque spike and then the torque craters and goes up again.
Keep in mind that when I did my 197 whp baseline, I had my license plate attached in front of my inter cooler which blocked some air. This may have contributed to such a low baseline dyno number. But Yea, I'll have you guys install it. I just wanna hit that 300whp benchmark on your dyno so I wanna get the rest of my parts.
And as for that engine...
Straight shot in the dark cause I didn't look while I was there, but is it an RB. skyline engine? What's my prize? lol
And as for that engine...
Straight shot in the dark cause I didn't look while I was there, but is it an RB. skyline engine? What's my prize? lol
Keep in mind that when I did my 197 whp baseline, I had my license plate attached in front of my inter cooler which blocked some air. This may have contributed to such a low baseline dyno number. But Yea, I'll have you guys install it. I just wanna hit that 300whp benchmark on your dyno so I wanna get the rest of my parts.
And as for that engine...
Straight shot in the dark cause I didn't look while I was there, but is it an RB. skyline engine? What's my prize? lol
And as for that engine...
Straight shot in the dark cause I didn't look while I was there, but is it an RB. skyline engine? What's my prize? lol
Yes, that is a skyline motor!
It happens in this car as well
https://www.evolutionm.net/forums/ev...hp-320wtq.html
In the linked car there is a torque spike and then the torque craters and goes up again.
https://www.evolutionm.net/forums/ev...hp-320wtq.html
In the linked car there is a torque spike and then the torque craters and goes up again.
Last edited by DG Motors; Apr 8, 2009 at 06:08 AM.
I knew it, you were very top secret about your new project and I had a feeling it was going to be in the nissan direction. But yea, I'm bringing my boy with the gto when I come through next time so he can get dyno'd by you guys so we can compare our numbers. My goal is to be able to beat his quarter mile at e-town this summer and to be able to beat him from a 40mph roll on the highway. He's dyno'd on a mustang but he wants to see his numbers on a dynodynamics as well.
REDEVO08-yea, you crept up on my left side and we didn't even get to have any fun cause I had to get off the parkway. Wingless right! When is the next time your going to DG? And what kind of exhaust did you have it looked weird and stealthy.
so pete wants to go rb motor i see....im telling you if i see a skylline pull in there im moving into DG thats it....evofan 08 just for you i took on a 335i on a little drag race thanks to my new launching ways thats another W under my belt
Sorry guys but the nissan project is for a good customer of ours. The goal is 800whp on this dyno which should be pretty easy with the turbo we are stuffing on it!
As far as my project goes, it will be with mitsubishi! I will let that out in a few weeks. Very top secret project and will have this community amazed. The whole east coast will be in trouble this year
As far as my project goes, it will be with mitsubishi! I will let that out in a few weeks. Very top secret project and will have this community amazed. The whole east coast will be in trouble this year
Evo a Mula- Good looking out, but I'm going to exercise my revenge on the bimmers at the track with quarter mile times. lol
DG Motors- I wish I had your customers RB25DET wallet, Real talk how much would it cost me to pick up an RB engine and put it in a 240? You know what nevermind let me concentrate on getting my x in the 400 awp range then I'll think about other things. lol
Oh, for those of you who asked about my camera here it is, GoPro wearable digital camera http://www.goprocamera.com/ 200$ from pepboys. I love it, and with the suction cup... you can damn near hang from it, No regrets in my purchase it can shoot video for up to two hours with a 2 gig memory card and fresh triple A batteries.
Here's a pic I took at night cruising. Does video and photos, and can even shoot upside down.
I didn't get to edit the video from the trip home from DG that day but I'll post it soon as my job gives me five seconds to rest.
DG Motors- I wish I had your customers RB25DET wallet, Real talk how much would it cost me to pick up an RB engine and put it in a 240? You know what nevermind let me concentrate on getting my x in the 400 awp range then I'll think about other things. lol
Oh, for those of you who asked about my camera here it is, GoPro wearable digital camera http://www.goprocamera.com/ 200$ from pepboys. I love it, and with the suction cup... you can damn near hang from it, No regrets in my purchase it can shoot video for up to two hours with a 2 gig memory card and fresh triple A batteries.
Here's a pic I took at night cruising. Does video and photos, and can even shoot upside down.
I didn't get to edit the video from the trip home from DG that day but I'll post it soon as my job gives me five seconds to rest.
Last edited by evofan_08; Apr 8, 2009 at 02:32 PM. Reason: forgot to add something