Notices
Evo X Dyno Results Discuss vendor and member dyno tuning techniques, results and graphs.

08 6262 E-Spec tuned ;)

Thread Tools
 
Search this Thread
 
Old Oct 31, 2011 | 12:41 PM
  #16  
E-Spec@Tach Motor Works's Avatar
Former Sponsor
iTrader: (11)
 
Joined: Jul 2010
Posts: 473
Likes: 0
From: Oceanside
Originally Posted by murlo26
Loss of tach signal probably.
Correct!!
Reply
Old Oct 31, 2011 | 04:53 PM
  #17  
RU EVO's Avatar
Evolving Member
iTrader: (5)
 
Joined: Sep 2008
Posts: 112
Likes: 0
From: New Jersey
Originally Posted by 2003evo8
nice numbers but its like a bomb ready to blow up good luck
My bomb has been ticking for about 2 years with about 20K miles. He should be fine at this power level with appropriate maintenance and monitoring.

To the OP Congrats on the Power.
Reply
Old Oct 31, 2011 | 04:55 PM
  #18  
wtfisak24's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Apr 2008
Posts: 65
Likes: 0
From: World
Thanks guys appreciate if.... Clutch is next ! Car is beyond well maintained e-spec can vouch for that!!! We'll be doin a drop in piston n rod setup in the near future
And push a little more
Reply
Old Oct 31, 2011 | 05:17 PM
  #19  
xezerax's Avatar
Newbie
iTrader: (1)
 
Joined: Jan 2009
Posts: 73
Likes: 0
From: LI, NY
Nice looks good, what are you revving to?
Reply
Old Nov 1, 2011 | 05:40 PM
  #20  
wtfisak24's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Apr 2008
Posts: 65
Likes: 0
From: World
Originally Posted by xezerax
nice looks good, what are you revving to?
7800
Reply
Old Nov 1, 2011 | 05:41 PM
  #21  
wtfisak24's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Apr 2008
Posts: 65
Likes: 0
From: World
Originally Posted by johnvan29
What specific bolt-ons do you have?
full exhaust, ic piping, ic, ets intake. bout sums it up. its a basic bolted and big turbo slapped on evo x
Reply
Old Nov 1, 2011 | 05:44 PM
  #22  
wtfisak24's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Apr 2008
Posts: 65
Likes: 0
From: World
Originally Posted by HAHAV8
I don't think this power level is going to blow this engine; his torque is low. The 4b11 is realistically just as strong as the 4g63, with the right tuning, you're just getting haters from the 8/9 camp...

This is a nice setup. How laggy is it on the streets? I bet this is a highway monster.

not laggy at all. sees 20 psi by 4800 and its all go from there. it obv does not spool like stock, but i can tell you this much, i had a stock turbo fully bolted and tuned evo jump me by no more than half a car before i full spooled and blew by him. top end is ridiculous on it and the gears just end so quick. look at the lag as good for gas mileage, because i am yet to drop below 240 miles a tank...and trust me i beat the crap out of this car
Reply
Old Nov 1, 2011 | 05:45 PM
  #23  
wtfisak24's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Apr 2008
Posts: 65
Likes: 0
From: World
Originally Posted by E-Spec@Tach Motor Works



Thanks for choosing us to be a part of your project.


hey e...aim for nov 11th which is a friday for me to be back so we can finish it up.

couldnt have done it without u pal...ur approach on the car and attention to detail with the tune is beyond me.
Reply
Old Nov 1, 2011 | 05:52 PM
  #24  
PsiFlyBy's Avatar
Newbie
 
Joined: Oct 2011
Posts: 57
Likes: 0
From: CT
thats impressive.
Reply
Old Nov 1, 2011 | 05:59 PM
  #25  
wtfisak24's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Apr 2008
Posts: 65
Likes: 0
From: World
drop in pistons n rods...some gsc s2's, and we would like to see 500hp at 26psi.
Reply
Old Nov 2, 2011 | 06:01 AM
  #26  
Poloiceberg's Avatar
Evolving Member
iTrader: (12)
 
Joined: Dec 2007
Posts: 282
Likes: 0
From: Ny
u definitely have my favorite X bro! U will make more than 500 after your build, i made 554 on 27psi on the 63a/r....
Reply
Old Nov 2, 2011 | 09:25 AM
  #27  
wtfisak24's Avatar
Thread Starter
Newbie
iTrader: (4)
 
Joined: Apr 2008
Posts: 65
Likes: 0
From: World
Originally Posted by Poloiceberg
u definitely have my favorite X bro! U will make more than 500 after your build, i made 554 on 27psi on the 63a/r....
Appreciate the kind words brother!!!! Text u in a bit!
Reply
Old Nov 7, 2011 | 11:13 PM
  #28  
KJ82's Avatar
Evolved Member
iTrader: (3)
 
Joined: Jul 2010
Posts: 529
Likes: 0
From: Iraq; New Jersey
Lmao yet Smh @ ticking time bomb... Good numbers for stock block on pump.
Reply
Old Mar 26, 2012 | 01:47 AM
  #29  
peruevox's Avatar
Newbie
 
Joined: May 2009
Posts: 27
Likes: 0
From: so cal
this is a ball Bering turbo or journal turbo??
Reply
Old Mar 26, 2012 | 06:30 AM
  #30  
Evo3573's Avatar
Evolving Member
iTrader: (25)
 
Joined: Aug 2010
Posts: 416
Likes: 0
From: pa
Nice numbers
Reply



All times are GMT -7. The time now is 10:57 AM.