GT3076r 424pump/484 104 oct
Thread Starter
Newbie
Joined: Apr 2009
Posts: 24
Likes: 0
From: Utah
GT3076r 424pump/484 104 oct
list of mods:
garrett GTX-3076r, Cosworth cams & springs, ARP head studs, AMS O2 housing downpipe, 3inch Turbo back, AFI exhaust manifold, Injector Dynamics 1000cc, Walbro 255LPH Fuel Pump, AMS intercooler, AMS LICP, AMS UICP, HKS intake.
Parts were put together by Solid Autoworks:
Then The car was sent to The Boost Creep in Colorado and was pro tuned with the Cobb AccessPort:
on 91 @ 25 PSI:
on 104 @ 29 PSI:
Dyno run:
http://www.youtube.com/watch?v=9Wwn0OyG0x0
garrett GTX-3076r, Cosworth cams & springs, ARP head studs, AMS O2 housing downpipe, 3inch Turbo back, AFI exhaust manifold, Injector Dynamics 1000cc, Walbro 255LPH Fuel Pump, AMS intercooler, AMS LICP, AMS UICP, HKS intake.
Parts were put together by Solid Autoworks:
Then The car was sent to The Boost Creep in Colorado and was pro tuned with the Cobb AccessPort:
on 91 @ 25 PSI:
on 104 @ 29 PSI:
Dyno run:
http://www.youtube.com/watch?v=9Wwn0OyG0x0
Last edited by miniend; Nov 30, 2011 at 09:29 PM. Reason: Not allowed to link non-sponsor vendors in posts.
Evolving Member
Joined: Nov 2009
Posts: 190
Likes: 1
From: WA
thats great result! couple of us guys just got these turbo's recently. i'm waiting on cams/springs atm and just about to pull the trigger on the AFI mani.
this is on a stock bottom end right?
have you got any VD graphs (dynojet) at all?
this is on a stock bottom end right?
have you got any VD graphs (dynojet) at all?
Thread Starter
Newbie
Joined: Apr 2009
Posts: 24
Likes: 0
From: Utah
I think that turbo rocks! Yes thats a stock bottom end.
Thread Starter
Newbie
Joined: Apr 2009
Posts: 24
Likes: 0
From: Utah
Looks like solid gains. But it does spool very late even for BB. I mean a Red/Black can produce these numbers and spool much quicker from what I seen and what I tuned. But great gains none the less. I would just like the spool a bit earlier. Otherwise the power is right on par.
Trending Topics
Evolving Member
Joined: Nov 2009
Posts: 190
Likes: 1
From: WA
well we can't see his mivec/wgdc maps so we don't know how this turbo could spool on this setup and there is too little info atm regarding it as opposed to red/black. there is a little (tiny bit) more info on evoxforums regarding this turbo and as shown it can spool 29psi by 3750rpm but again thats not knowing how aggressive those mivec maps are either.
maybe you can get it spooling faster like you did the red in your recent thread however judging by what this turbo is rated at its more like a black than a red anyway and 29psi @ 3750 ain't at all bad for this wheel!
i have an 8 with a black and all supporting mods and so far i feel the gtx on the heavier X without cams or ported mani is a much better turbo than the black on 93.
its all relative though on what you want to achieve right? if you're curious to see what you can get out of the gtx compared to red/black let me know.
maybe you can get it spooling faster like you did the red in your recent thread however judging by what this turbo is rated at its more like a black than a red anyway and 29psi @ 3750 ain't at all bad for this wheel!
i have an 8 with a black and all supporting mods and so far i feel the gtx on the heavier X without cams or ported mani is a much better turbo than the black on 93.
its all relative though on what you want to achieve right? if you're curious to see what you can get out of the gtx compared to red/black let me know.
Exactly, we do not know what his MIVEC, Timing, etc... are at all. I agree it probably can spool earlier than this. However there just needs to be more data from more people to get a overall picture. FP has been well proven over the years.
This turbo can probably spool a touch quicker than represented here.
Who got 29 psi @ 3750?
This turbo can probably spool a touch quicker than represented here.
Who got 29 psi @ 3750?
well we can't see his mivec/wgdc maps so we don't know how this turbo could spool on this setup and there is too little info atm regarding it as opposed to red/black. there is a little (tiny bit) more info on evoxforums regarding this turbo and as shown it can spool 29psi by 3750rpm but again thats not knowing how aggressive those mivec maps are either.
maybe you can get it spooling faster like you did the red in your recent thread however judging by what this turbo is rated at its more like a black than a red anyway and 29psi @ 3750 ain't at all bad for this wheel!
i have an 8 with a black and all supporting mods and so far i feel the gtx on the heavier X without cams or ported mani is a much better turbo than the black on 93.
its all relative though on what you want to achieve right? if you're curious to see what you can get out of the gtx compared to red/black let me know.
maybe you can get it spooling faster like you did the red in your recent thread however judging by what this turbo is rated at its more like a black than a red anyway and 29psi @ 3750 ain't at all bad for this wheel!
i have an 8 with a black and all supporting mods and so far i feel the gtx on the heavier X without cams or ported mani is a much better turbo than the black on 93.
its all relative though on what you want to achieve right? if you're curious to see what you can get out of the gtx compared to red/black let me know.
Looks like solid gains. But it does spool very late even for BB. I mean a Red/Black can produce these numbers and spool much quicker from what I seen and what I tuned. But great gains none the less. I would just like the spool a bit earlier. Otherwise the power is right on par.
