Steve?

Hey guys, maybe a newb question, but electrical stuff is not my strong suit. I have a 2012 non-HID GSR. The previous owner swapped out the low beams for HIDs with the ballast converter (HID System XE 1688), but had them in the stock Halogen housing.

So I need to replace my headlights after I decided to smash my passenger side one, and am looking into some aftermarket headlights that have projectors (Spyder or vland, undecided at this point). So my question is - Do I need to buy headlights for Non-HID, or should I buy HID type since I already have the converter?

Thanks in advance.

.M.

You need the non hid headlights so it'll plug into the factory harness.

Steve?

Thanks for the quick reply. That's sort of what I was figuring, but again - not my strong suit.

Non-HID it is.

mlouis

iTrader: (6)

Do not use HID's in halogen housing, they're illegal and they blind oncoming traffic. Just buy a set of oem hid headlights or depos and retrofit them with evox-r projectors.

KnightRyderx2

The only aftermarket housing that I would suggest you use would be the factory replica Depo, you can find them on Ebay and Amazon for $300. The projector in them is not to bad, almost like stock.