Basic Evo X ROM XML definition

Reply Subscribe

Thread Tools

Search this Thread

Dec 3, 2008 | 12:46 AM

#46

xbox4414

Evolved Member

iTrader: (2)

Joined: Nov 2003

Posts: 606

Likes: 0

From: Mtz, CA

Bryan says this is no longer the latest again...when asked about boost control and stopping CEL P1235, I posed the following:

Quote:

- <table name="Airflow Check Map #1" category="Intake" address="5e949" type="3D" level="1" swapxy="true" scaling="ISCVSteps">
<table name="X" address="6248e" type="X Axis" elements="14" scaling="Volts16" />
<table name="Y" address="62466" type="Y Axis" elements="17" scaling="RPM" />
</table>
- <table name="Airflow Unknown #1" category="Intake" address="5ec3f" type="3D" level="1" swapxy="true" scaling="Load8">
<table name="X" address="624d6" type="X Axis" elements="6" scaling="ThrottleVoltage16" />
<table name="Y" address="624b0" type="Y Axis" elements="16" scaling="RPM" />
</table>
- <table name="Airflow Check Map #2" category="Intake" address="5ea3e" type="3D" level="1" swapxy="true" scaling="ISCVSteps">
<table name="X" address="6248e" type="X Axis" elements="14" scaling="Volts16" />
<table name="Y" address="62466" type="Y Axis" elements="17" scaling="RPM" />
</table>
- <table name="Airflow Check map #3" category="Intake" address="5eb34" type="3D" level="1" swapxy="true" scaling="ISCVSteps">
<table name="X" address="6248e" type="X Axis" elements="14" scaling="Volts16" />
<table name="Y" address="62466" type="Y Axis" elements="17" scaling="RPM" />
</table>

+ <table name="Flow Check table" category="Intake" address="60a89" type="3D" level="1" swapxy="true" scaling="ISCVSteps">
<table name="X" address="62a72" type="X Axis" elements="21" scaling="Load" />
<table name="Y" address="62a5a" type="Y Axis" elements="9" scaling="RPM" />
</table>

Bryan noted this isn't the most recent XML so, is there another new one to check out becuase I want to figure out these limiters that cause P1235. I don't what other tables ECUFlash will read to stop it. I mean ECUtek does stop P1235 but I don't know how....

Dec 9, 2008 | 03:03 PM

#47

bbarnhill

Evolved Member

iTrader: (1)

Joined: Oct 2008

Posts: 692

Likes: 1

From: Kansas City, KS

Any news on when the ECUFlash will be made available? Any new estimates on time we are looking at before getting it? Will it be available for christmas