The watered-down tuning guide please..
Evolved Member
Joined: Jun 2008
Posts: 824
Likes: 24
From: Sydney
^brn12345,
the graph is figure 26 in the KNOCKBASE section on page 56.
I was actually reviewing and touching-up that whole section last night and added a reference to where the graph is. I thought having the same figure twice was a bit silly.
In the next release, the section on FALSE KNOCK has been re-written showing EvoX tables, not Evo9 tables, as they are quite a bit different. Same principal though.
The MISC EVOX & RALLIART ROM IDENTIFIER table needs input, but it will have to come from the general Evo community. Please check this against your ROM and PM me any additions or updated info.
Another section that could be greatly improved is APPENDIX 4: LOGGING & EVOSCAN ADDRESS SETUP. Please send me any further data you can on this.
There are gaps in the ECU pinout descriptions, if anyone has a factory Service Manual and can help I would like to hear from you.
I was sent a def file with the intercooler parameters the other day. These have been included in the next release. Also the starting primer and cranking tables (both) have been included.
So, please keep the comments and usefull info flowing.
the graph is figure 26 in the KNOCKBASE section on page 56.
I was actually reviewing and touching-up that whole section last night and added a reference to where the graph is. I thought having the same figure twice was a bit silly.
In the next release, the section on FALSE KNOCK has been re-written showing EvoX tables, not Evo9 tables, as they are quite a bit different. Same principal though.
The MISC EVOX & RALLIART ROM IDENTIFIER table needs input, but it will have to come from the general Evo community. Please check this against your ROM and PM me any additions or updated info.
Another section that could be greatly improved is APPENDIX 4: LOGGING & EVOSCAN ADDRESS SETUP. Please send me any further data you can on this.
There are gaps in the ECU pinout descriptions, if anyone has a factory Service Manual and can help I would like to hear from you.
I was sent a def file with the intercooler parameters the other day. These have been included in the next release. Also the starting primer and cranking tables (both) have been included.
So, please keep the comments and usefull info flowing.
Merlin, holy cr@p! This thing is amazing, exactly what I have trying to find. Most all the info I find for tuning seems out of date (not concepts, but specifics). Thank you very much for all your hard work, it is definitely appreciated!
HAPPY HOLIDAYS!!
-Steve-
HAPPY HOLIDAYS!!
-Steve-
Evolving Member
Joined: Aug 2004
Posts: 142
Likes: 0
From: Germany
I've been trying to piece stuff together from DOZENS of threads but your guide is the dog's bollocks!
Would also like to know paypal or somth. for donation!
As a noob I have one additional recommendation. Perhaps a section describing how to get WBO2's connected to EvoScan. I know for me personally I'm having a hell of time trying to get EvoScan to recognize my ProSport WBO2.
Just my $.02
Just my $.02
Evolved Member
Joined: Jun 2008
Posts: 824
Likes: 24
From: Sydney
