Notices
Evo X Engine Management / Tuning Forums Discuss the major engine management systems.

New owner and need help...

Thread Tools
 
Search this Thread
 
Old Jun 12, 2016 | 05:10 PM
  #1  
s2kvee's Avatar
Thread Starter
Newbie
 
Joined: Jun 2016
Posts: 1
Likes: 0
From: Northern California
New owner and need help...

I recently picked up a 2010 evo x MR that has a protune.. Not sure who did it and how it was done.. But I need to get the car to pass emission In order to register..

Today I picked up an unmarried accessport., my question is, will I be able to flash one of cobbs OTS maps In order to activate some emission monitors that the protune disabled. Assuming by installing the accessport, it will save the current protune as the stock base tune...

Any inputs.?
Reply
Old Jun 12, 2016 | 06:08 PM
  #2  
WWGSR's Avatar
Evolving Member
iTrader: (2)
 
Joined: Jun 2008
Posts: 123
Likes: 0
From: Texas
Yes
Reply
Old Jun 12, 2016 | 07:27 PM
  #3  
.M.'s Avatar
.M.
Evolved Member
 
Joined: Jun 2014
Posts: 899
Likes: 40
From: Chicago
Yes. Just don't flash a stage 3 map (depending on your mods). It also disables the rear and you won't pass.
Reply
Old Jun 17, 2016 | 06:20 AM
  #4  
jakgal04's Avatar
Evolved Member
iTrader: (1)
 
Joined: Jan 2015
Posts: 551
Likes: 28
From: Ridley park
It'll work, and if you uninstall the Accessport it'll put the tuned ROM back on. Just make sure when you flash it that you stay out of boost, especially if you aren't sure what mods are on there.

I know you just picked up the AP, but if inspection becomes an issue, I used the inspection patch with an OpenPort and passed yesterday.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Unuselectus
EvoM New Member / FAQs / EvoM Rules
4
Jan 18, 2018 07:56 AM
gvsk
EvoM New Member / FAQs / EvoM Rules
10
Oct 9, 2010 05:55 PM
Dowve
Northeast Region
4
Mar 6, 2010 01:22 PM
nytejade
EvoM New Member / FAQs / EvoM Rules
3
Oct 5, 2008 08:36 AM




All times are GMT -7. The time now is 11:13 PM.