Notices
Evo X Engine / Turbo / Drivetrain Everything from engine builds to the best clutch and flywheel.

Is this a good turbo

Thread Tools
 
Search this Thread
 
Old Jun 28, 2010 | 09:12 PM
  #1  
mrgt47's Avatar
Thread Starter
Newbie
 
Joined: Jun 2010
Posts: 2
Likes: 0
From: reseda ca
Is this a good turbo

I have a 2006 MR. and I've done all the bolt on mods from intercooler to exhaust tip. I got a 255 lph pump and I think I'm ready to do a bigger turbo, Has anyone heard of Comp Turbos? I've heard of turbonetics, garret, hks but they are expensive for BB. Is this a good turbo? what can I expect it to boost at (RPM). Looking to make 500 awhp on pump gas. thanks in advance. or should I go with a diffrent turbo
http://cgi.ebay.com/ebaymotors/CT467...item2eae163e91
Reply
Old Jun 29, 2010 | 07:23 AM
  #2  
CatalystGod's Avatar
Evolved Member
 
Joined: May 2008
Posts: 900
Likes: 1
From: Ashburn, VA
wrong section.
Reply
Old Jun 29, 2010 | 07:36 AM
  #3  
chkmgnt59's Avatar
Evolved Member
iTrader: (3)
 
Joined: May 2009
Posts: 531
Likes: 0
From: DFW
wrong section, and, i'd avoid ebay like the plague. if you want a gt35 t3 turbo, a pte6262 shouldn't be more than 8-900, and is good
Reply
Old Jun 30, 2010 | 01:10 PM
  #4  
YShen15118's Avatar
Evolving Member
 
Joined: Jul 2009
Posts: 142
Likes: 0
From: CT
I would seriously not skimp out on the turbo. It's the defining characteristic to the Evo! Get an expensive, name brand one, because that's what the car deserves and you won't run the risk of prematurely destroying your car.
Reply
Old Jun 30, 2010 | 01:19 PM
  #5  
evo ace's Avatar
Newbie
 
Joined: Apr 2006
Posts: 55
Likes: 0
From: Long Beach, Ca
Go for quality... Remember, u get what u pay for.
Reply
Old Jul 3, 2010 | 11:06 AM
  #6  
oraclesam's Avatar
Newbie
iTrader: (2)
 
Joined: Mar 2008
Posts: 58
Likes: 0
From: Altamonte Springs, Florida
Originally Posted by chkmgnt59
wrong section, and, i'd avoid ebay like the plague. if you want a gt35 t3 turbo, a pte6262 shouldn't be more than 8-900, and is good
$800-$900, what's missing on it? I haven't seen that pricing.
Reply
Old Jul 3, 2010 | 12:07 PM
  #7  
mlomker's Avatar
Evolved Member
iTrader: (1)
 
Joined: Aug 2009
Posts: 1,468
Likes: 0
From: Saint Paul
Originally Posted by oraclesam
$800-$900, what's missing on it? I haven't seen that pricing.
That'd be just the turbo. I assume you need a kit...exhaust manifold, waste gates, dump pipe, intake, oil lines, etc. That stuff all adds up.

I agree that I'd go right for an ETS 6262 kit if I were you but yeah, we're talking $4-5k just for parts.

Last edited by mlomker; Jul 3, 2010 at 12:11 PM.
Reply
Old Jul 3, 2010 | 12:27 PM
  #8  
chkmgnt59's Avatar
Evolved Member
iTrader: (3)
 
Joined: May 2009
Posts: 531
Likes: 0
From: DFW
8-900 is for just the turbo. The ebay listing was a t3 flanged turbo, so I assumed he was looking to build his own kit. So a 6262 is only ~300 more than the turbo he listed. But yes, a 6262 kit is 4-5k complete
Reply




All times are GMT -7. The time now is 08:06 PM.