yeah I'll do that

 

I actually think that's correct, because when they only sent me one gasket for my exhaust and I tried to source another, I had to try to find something 3.15" (80mm) and all I could find is 3".

I'll double check tonight

 

awesome. should be real interesting to try and find 80mm piping -_-

 

the pictures didn't come out, but the ID is exactly 3.00"

 

:-D that makes things so much easier

 

if anyone was interested I should be getting the 2.75" flange and pipe section cut off this friday and replaced with a 3" section along with a custom test pipe. will show results when i have them. thanks guys.

 

Hey guys, so i recently installed the Greddy Ti-C on my Evo 8 and here is what i noticed. I know that its listed at 80mm to 80mm in diameter which is approx 3inches but during the installation, I noticed that the size of exhaust flange of the Ti-C that connects to my 3inch test pipe seems smaller in diameter. so i am questioning if its actually approx 3inch in diameter on the inner piping. what are your thoughts? thanks