Notices
Evo X Engine / Turbo / Drivetrain Everything from engine builds to the best clutch and flywheel.

Looking for help with turbo upgrade/ other mods

Thread Tools
 
Search this Thread
 
Old Apr 26, 2013 | 07:54 PM
  #1  
sharble24's Avatar
Thread Starter
Newbie
 
Joined: Feb 2013
Posts: 2
Likes: 0
From: Pe
Looking for help with turbo upgrade/ other mods

I'm new to Mitsubishi only had mine about 8 months now..needless to say its time for some upgrades. Right now I have an aftermarket down pipe, test pipe running into ets extremes catback. Agp cold air intake and a buscher racing intercooler. But I'm stuck on mods needs to support a bigger turbo. I know I'll need more fuel but I would just like some help on any ideas.

My plan is for my next step for cams and turbo (not looking for a kit costing thousands of dollars) can anyone help out with supporting mods? I'm looking to run stock manifold and not looking to upgrade internals, I would like to keep the stock clutch tho for now, I'll eventually be upgrading it but not sure if I can afford it yet with upgrading turbo. It's a daily driver so for now I would like to run conservative until I can get the full supporting mods to run more up. I'm keeping it on pump gas with no meth.

This thread prob looks stupid but like I said I'm new to the evo and Dk much about it to mod it myself
Reply
Old Apr 26, 2013 | 11:03 PM
  #2  
Rktechevox's Avatar
Newbie
 
Joined: Jan 2012
Posts: 40
Likes: 0
From: Arleta
You will need to upgrade your fuel, injectors and fuel pump. And for good power I say stick to ef2.5 or an FP green. But if you'd like some room for grow then go to red or ef3 and build the block down the road
Reply
Old Apr 27, 2013 | 06:23 AM
  #3  
sharble24's Avatar
Thread Starter
Newbie
 
Joined: Feb 2013
Posts: 2
Likes: 0
From: Pe
I was looking more along the lines of a Garrett ball bearing turbo, maybe a 3076r
Reply
Old Apr 27, 2013 | 06:49 AM
  #4  
CurseDSM's Avatar
EvoM Guru
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (3)
 
Joined: Sep 2009
Posts: 3,588
Likes: 298
From: Pinckney, Michigan
Originally Posted by sharble24
I was looking more along the lines of a Garrett ball bearing turbo, maybe a 3076r
3076r is a great turbo, you may want to look along the lines of a bb pte 6262 as well. I love that turbo. As Rktechevox said depending on fuel you will want to upgrade injectors, Walbro pump or anything along those lines, or if you plan on e85 a double pumper, cams, spring and retainers, ported intake mani and exhaust mani.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TheKidd113
Vendor Service / Parts / Tuning Review
25
Feb 22, 2015 05:20 PM
jsmits2689
Evo X General
24
Jan 12, 2012 08:45 AM
zoso
Evo Engine / Turbo / Drivetrain
15
Jan 2, 2011 01:39 AM
Werd
Evo Engine / Turbo / Drivetrain
32
Feb 27, 2010 10:21 PM
DaveK
Evo Engine / Turbo / Drivetrain
42
Jul 3, 2008 06:23 AM




All times are GMT -7. The time now is 07:55 AM.