Cosworth Intake Manifold
Nov 3, 2018, 08:05 AM
#1
Evolving Member
Thread Starter
Cosworth Intake Manifold
Evo X Cosworth intake manifold
Did this manifold ever go in to production? If so did anyone purchase one and what was your opinion?
Last edited by nglett; Nov 3, 2018 at 08:15 AM. Reason: picture never uploaded
Nov 7, 2018, 07:21 PM
#4
Evolving Member
Thread Starter
That’s kinda what I figured. If it did get produced, I’m sure it was a low production run. It’s a solid looking intake, I would like to know more about it if can be purchased.
Have you tried The BoomBop Shop? Their website shows they have it in stock.
http://www.theboombopshop.com/Coswor...p/20012941.htm
Have you tried The BoomBop Shop? Their website shows they have it in stock.
http://www.theboombopshop.com/Coswor...p/20012941.htm
Nov 8, 2018, 10:25 AM
#5
EvoM Guru
iTrader: (1)
Blitz made a similar intake. Could contact Evasive and see if they can get it.
https://www.evasivemotorsports.com/m...SABEgIvYPD_BwE
Worth talking about though is how much HP do you want to make? The stock X IM works very well into the 700-800whp range.
https://www.evasivemotorsports.com/m...SABEgIvYPD_BwE
Worth talking about though is how much HP do you want to make? The stock X IM works very well into the 700-800whp range.
Nov 8, 2018, 11:39 AM
#6
Evolving Member
Thread Starter
My thinking was the Cosworth intake was designed to work with their cams. Definitely not looking to make 700whp.
I’ve seen Blitz’s intake and it’s a solid looking design as well but the plenum volume it to large for the hp range I’m planning on. Plus the nearly $2k price tag is to much high.
I’ve seen Blitz’s intake and it’s a solid looking design as well but the plenum volume it to large for the hp range I’m planning on. Plus the nearly $2k price tag is to much high.
Last edited by nglett; Nov 8, 2018 at 11:41 AM. Reason: Forget
Nov 8, 2018, 12:58 PM
#7
EvoM Guru
iTrader: (1)
For your power goals, you don't need a manifold.
