Everything I see is labeled evo8 or evo9. Will these same studs work on my evo 10?

 

According to some vendors, they are the same.

E.g., http://www.stikiller.com/product.php?productid=16709

 

Ill find out for you in the morning we have a set on our track car. I just cant currently remember but I think there the same.

 

I think they are the same

 

I run the ARP extended studs meant for the VIII-IX on my X right now.

I've also replaced stock X studs w/ stock VIII-IX after I managed to break a couple studs.

 

They are the same stud Mitsubishi didn't change the thread pitch over the years.

 

They might be the same (and it seem that they are), but the fact that they are the same thread pitch is almost completely irrelevant. That was a given. The question was whether the knurl length and diameter were the same.

 

Wheel stud diameter is pretty standardized at m12 pitch is what they would change.

 

You need to stop. You have no idea what you're talking about. It's not the threaded part that varies between makers; it's the knurl part that actually fits in the hole in the hub that varies.