Downpipe question..
Downpipe question..
I know everyone says ams... but ive been looking around and found this one, quality looks pretty well, what do you guys think? http://deporacing.us/product.php?id_product=159
1) The material its made out of.
2) How well the mouth 02 housing is made
3) Fitment
4) Quality of Welds. ( this will determine the longetivity of the pipe)
5) Actual result testing.
6) MFG support for the part.
7) Options ( ie coating ,etc)
honestly I would do ETS/AMS are some of the good choices.
I think the everyone will say the following:
You get what you paid for
Evolving Member
Joined: Sep 2012
Posts: 184
Likes: 0
From: St. Paul, MN
not all pipes are created equal.
1) The material its made out of.
2) How well the mouth 02 housing is made
3) Fitment
4) Quality of Welds. ( this will determine the longetivity of the pipe)
5) Actual result testing.
6) MFG support for the part.
7) Options ( ie coating ,etc)
honestly I would do ETS/AMS are some of the good choices.
I think the everyone will say the following:
You get what you paid for
1) The material its made out of.
2) How well the mouth 02 housing is made
3) Fitment
4) Quality of Welds. ( this will determine the longetivity of the pipe)
5) Actual result testing.
6) MFG support for the part.
7) Options ( ie coating ,etc)
honestly I would do ETS/AMS are some of the good choices.
I think the everyone will say the following:
You get what you paid for
Trending Topics
not all pipes are created equal.
1) The material its made out of.
2) How well the mouth 02 housing is made
3) Fitment
4) Quality of Welds. ( this will determine the longetivity of the pipe)
5) Actual result testing.
6) MFG support for the part.
7) Options ( ie coating ,etc)
honestly I would do ETS/AMS are some of the good choices.
I think the everyone will say the following:
You get what you paid for
1) The material its made out of.
2) How well the mouth 02 housing is made
3) Fitment
4) Quality of Welds. ( this will determine the longetivity of the pipe)
5) Actual result testing.
6) MFG support for the part.
7) Options ( ie coating ,etc)
honestly I would do ETS/AMS are some of the good choices.
I think the everyone will say the following:
You get what you paid for
My $195 Megan vs a $329 AMS down pipe. Same design. Same material. Perfect fitment. Saved me $ for other parts worth spending extra on.
Not all downpipes are created equal... https://www.evolutionm.net/forums/ev...mpetition.html
not all pipes are created equal.
1) The material its made out of.
2) How well the mouth 02 housing is made
3) Fitment
4) Quality of Welds. ( this will determine the longetivity of the pipe)
5) Actual result testing.
6) MFG support for the part.
7) Options ( ie coating ,etc)
honestly I would do ETS/AMS are some of the good choices.
I think the everyone will say the following:
You get what you paid for
1) The material its made out of.
2) How well the mouth 02 housing is made
3) Fitment
4) Quality of Welds. ( this will determine the longetivity of the pipe)
5) Actual result testing.
6) MFG support for the part.
7) Options ( ie coating ,etc)
honestly I would do ETS/AMS are some of the good choices.
I think the everyone will say the following:
You get what you paid for
Overall, you just get what you pay for. If it's giving you what you want and what you wanted to pay for, great.
Newbie
Joined: Sep 2012
Posts: 36
Likes: 0
From: Westchester NY
Thats how i think when it comes to car parts. NOTHING is going to perform like High quality stuff. Theres always going to be a few things that make the good stuff worth it. when i buy a high quality part, i try to look at it like a INVESTMENT.
Thread
Thread Starter
Forum
Replies
Last Post
Piro Fyre
Evo Tires / Wheels / Brakes / Suspension
10
Jun 2, 2014 07:46 AM