I received a set of Anzo led tails for my Evo x as a present. For one, it's not plug and play fitment as they state. The corner lenses needed some fan dangling to fit, the trunk pieces are direct fitment. My issue is one of my tails on the trunk flickers when I turn on the lights thus leaving the whole side out.. But if I slowly turn the lights on one step at a time that side works fine... And when the car is off the faulty light on the trunk stays on but very dimly lit... So strange anyone can help

 

Sounds like there aren't resistors built into the tail lights. Can you verify if they are or not?

 

The corner tails have a resistor built in but not the tails located on the trunk.... Do you believe adding resistor would solve this problem