Notices
Evo X General Discuss any generalized technical Evo X related topics that may not fit into the other forums.
Sponsored by:
Sponsored by: CARiD

How to 400 whp with pump gas?

Thread Tools
 
Search this Thread
 
Old May 1, 2017 | 01:37 PM
  #1  
Frankenstein's Avatar
Thread Starter
Newbie
 
Joined: Oct 2015
Posts: 3
Likes: 0
From: San Jose California
How to 400 whp with pump gas?

Does anybody know how to get a Evo X GSR five speed to 400 whp with just pump gas? (no E85).
what mods will be required?

Last edited by Frankenstein; May 1, 2017 at 01:47 PM. Reason: Forgot to add info
Reply
Old May 1, 2017 | 01:52 PM
  #2  
Napalm_Enema's Avatar
Evolved Member
 
Joined: Nov 2013
Posts: 1,538
Likes: 91
From: Houston
Turbo
Injectors
Test Pipe
Downpipe
EBCS
Fuel Pump
CAI
Intercooler
UICP
LICP

Any other minor bits.

Most importantly - a Tuner that knows their *** from their elblow that can put all this together and not put a hole in your wallet shortly after when your car blows up and you have to rebuild.

Suggestion - do full boltons, everything except a turbo, then see if you want or need more. A lot of people roll into a car and say 'I want XXX horsepower!' without really knowing what they are asking for. 400 hp in a RWD car is a lot different than 400 AWD power.

Good luck and enjoy the car, but I'd take my time and see what it needs rather than 'I need to meet X number'

P.S. When you are at 400hp your gas MPG will be silly ridiculous horribly bad. Like you can watch the needle move when you bury your foot.
Reply
Old May 1, 2017 | 02:17 PM
  #3  
LetsGetThisDone's Avatar
EvoM Guru
10 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Oct 2013
Posts: 15,973
Likes: 1,629
From: Las Vegas
An MHI18k turbo and full compliment of bolt ons should do it if you 93 octane. 91 octane may require GSC S1 cams. I would do valve springs if you choose to go with cams.
Reply
Old May 1, 2017 | 02:28 PM
  #4  
4G63_EVO's Avatar
Evolved Member
iTrader: (4)
 
Joined: Jul 2012
Posts: 721
Likes: 46
From: Pasadena CA
I made about 368 with evo x 1000cc and fp green 27 psi
Reply
Old May 1, 2017 | 02:31 PM
  #5  
Chef-j's Avatar
Evolved Member
iTrader: (16)
 
Joined: Nov 2009
Posts: 951
Likes: 7
From: Dallas, TX
I will go Fp red, send core and get build by FP.
Reply
Old May 1, 2017 | 02:32 PM
  #6  
Frankenstein's Avatar
Thread Starter
Newbie
 
Joined: Oct 2015
Posts: 3
Likes: 0
From: San Jose California
Thanks guys. I had a SRT4 with 370 whp with a T4 Turbo. I loved it mid to top end power was crazy. Just hated FWD.
Reply
Old May 1, 2017 | 03:25 PM
  #7  
migs647's Avatar
Evolved Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (19)
 
Joined: May 2007
Posts: 5,043
Likes: 62
From: Portland
Originally Posted by Chef-j
I will go Fp red, send core and get build by FP.
Any idea how much it costs to convert with a core? Everything listed for them is $9,999. Also are they journal or ball bearing?
Reply
Old May 1, 2017 | 04:26 PM
  #8  
LetsGetThisDone's Avatar
EvoM Guru
10 Year Member
Liked
Loved
Community Favorite
iTrader: (1)
 
Joined: Oct 2013
Posts: 15,973
Likes: 1,629
From: Las Vegas
Originally Posted by migs647
Any idea how much it costs to convert with a core? Everything listed for them is $9,999. Also are they journal or ball bearing?
Journal bearing.


http://www.forcedperformance.net/mer...=Turbo-Upgrade
Reply
Old May 1, 2017 | 05:06 PM
  #9  
4G63_EVO's Avatar
Evolved Member
iTrader: (4)
 
Joined: Jul 2012
Posts: 721
Likes: 46
From: Pasadena CA
Originally Posted by migs647
Any idea how much it costs to convert with a core? Everything listed for them is $9,999. Also are they journal or ball bearing?
It never ends up being whats listed on the site, they always find stuff to tack onto the total that is wrong with your turbo
Reply
Old May 2, 2017 | 05:54 AM
  #10  
static_set's Avatar
Evolving Member
 
Joined: Oct 2016
Posts: 205
Likes: 18
From: Race City USA
For what it's worth to the OP, I used the stock turbo to reach ~370/360 with full bolt ons and Kelford 214As @28psi (tapering to 18).

Napalm is correct about gas mileage - i'll see 22-24 on the highway and between 15-18 city (if I'm lucky.) Later this year I'm planning on upgrading to the hated on Tomei 8280 to take some stress off the engine and hopefully increase longevity.


Might see 400, might not, who knows. Upper 300s is plenty of juice for these cars.


-asher
Reply
Old May 2, 2017 | 06:45 AM
  #11  
Chef-j's Avatar
Evolved Member
iTrader: (16)
 
Joined: Nov 2009
Posts: 951
Likes: 7
From: Dallas, TX
Originally Posted by migs647
Any idea how much it costs to convert with a core? Everything listed for them is $9,999. Also are they journal or ball bearing?
Yeah, they have not update their website. They actually still offer, i talked to them about month and half ago.
I think price starting at 1300 plus options like oil line etc etc. i had price sheet, but i cant find them.
Reply
Old May 2, 2017 | 06:49 AM
  #12  
Chef-j's Avatar
Evolved Member
iTrader: (16)
 
Joined: Nov 2009
Posts: 951
Likes: 7
From: Dallas, TX
Originally Posted by 4G63_EVO
It never ends up being whats listed on the site, they always find stuff to tack onto the total that is wrong with your turbo
No they dont. My local guy got his Red for tap over 1300 without anything upgrade. My friend just got his Green rebuilt for his 8, he never complain.
Reply
Old May 2, 2017 | 07:29 AM
  #13  
six40's Avatar
Evolved Member
10 Year Member
Photogenic
Liked
Loved
 
Joined: Nov 2012
Posts: 529
Likes: 66
From: Ontario, Canada
The $9,999 price listed is for the ball bearing centers which are no longer available. If you look under the "turbochargers" and then the "turbo upgrades" section, you'll see the prices associated with whatever turbo rebuild/upgrade you want.
Reply
Old May 2, 2017 | 07:41 AM
  #14  
Chef-j's Avatar
Evolved Member
iTrader: (16)
 
Joined: Nov 2009
Posts: 951
Likes: 7
From: Dallas, TX
Originally Posted by six40
The $9,999 price listed is for the ball bearing centers which are no longer available. If you look under the "turbochargers" and then the "turbo upgrades" section, you'll see the prices associated with whatever turbo rebuild/upgrade you want.
Thanks for clearing up. I got confuse a little bit lol
Reply
Old May 2, 2017 | 08:01 AM
  #15  
six40's Avatar
Evolved Member
10 Year Member
Photogenic
Liked
Loved
 
Joined: Nov 2012
Posts: 529
Likes: 66
From: Ontario, Canada
You're welcome. I know it is a bit confusing, they really need to clear up their site a little bit.
Reply



All times are GMT -7. The time now is 12:32 PM.